User manual BEKO WMB 51211 F

[. . . ] Do not connect your appliance to the electricity supply until all packing and transit protectors have been removed. â· Leave to stand for at least 4 hours before switching on, to allow compressor oil to settle, if transported horizontally. â· If you are discarding an old appliance with a lock or latch fitted to the door, ensure that it is left in a safe condition to prevent the entrapment of children. â· This appliance must only be used for its intended purpose. [. . . ] Some sections of the fridge may be cooler or warmer (such as salad crisper and top part of the cabinet) which is quite normal. We recommend that you check the temperature periodically with a thermometer to ensure that the cabinet is kept to this temperature. Frequent door openings cause internal temperatures to rise, so it is advisable to close the door as soon as possible after use. The plug has been inserted into the wall socket and the electricity is switched on. The liquid and gases sealed within the refrigeration system may also make some (noise), whether the compressor is running or not. Slight undulation of the top of the cabinet is quite normal due to the manufacturing process used; it is not a defect. The quality of the food is best preserved when it is frozen right through to the core as quickly as possible. Placing warm food into the freezer compartment causes the refrigeration machine to operate continously until the food is frozen solid. This can temporarily lead to excessive cooling of the refrigeration compartment. When freezing fresh food, keep the thermostat knob at medium position. Fill the ice - cube tray 3/4 full with water and place it in the freezer. When Select button is pressed, timer counter (5) digits will blink and the ring bell (6) sign will be on. Press Adjust (2) button until you reach the value you want to memorise. selected value is memorised and timer function becomes active if Select button is pressed or no other button will be pressed for 5 seconds. When the time is elapsed, the alarm will be on and an intermittent sound will be heard. The alarm will automatically stop after 5 minutes, or when any button will be pressed. The hour digits will blink for 5 s and value can be changed using Adjust button (2). If Select button is pressed one more time, selected value for hour is stored and minute digits will blink. If after the modification of the hour or minutes the Select button is not pressed, the adjusted value will not be saved. A 30 s default message is available when power is on, or when the recorded message was deleted. Envelope sign (8) indicates that a new message is in memory and it was not read. When a message is recorded and it was not read, the graphic sygn envelope (8) is active. [. . . ] It can be chilled for short periods as long as it is wrapped to prevent it flavouring other food. Don't- Cover the shelves with any protective materials which may obstruct air circulation. Don't- Store poisonous or any dangerous substances in your appliance. Don't- Store cooked and fresh food together in the same container. [. . . ]