User manual BEKO TLDA662

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BEKO TLDA662. We hope that this BEKO TLDA662 user guide will be useful to you.


BEKO TLDA662 : Download the complete user guide (1080 Ko)

Manual abstract: user guide BEKO TLDA662

Detailed instructions for use are in the User's Guide.

[. . . ] Tall Larder Fridge TLDA 662 BEKO plc Beko House Caxton Way Watford Hertfordshire WD18 8UF Tel: 01923 654650 Fax: 01923 819653 e-mail: service@beko. co. uk website: www. beko. co. uk Printed in Turkey Part no: 48 4658 00 00 Revision no: 0 Congratulations on your choice of a service for many years. quality Appliance which has been designed to give you CONTENTS PAGE WARNING !DO NOT connect your appliance to the electricity supply until all packing and transit protectors have been removed. · Leave to stand for at least 4 hours before switching on to allow compressor oil to settle if transported horizontally. · If you are discarding an old refrigerator with a lock or latch fitted to the door, disable the lock/latch, ensure that it is left in a safe condition to prevent the entrapment of young children. [. . . ] For hygiene reasons, always wrap food using a suitable packaging material before storing in your appliance to avoid contact with the appliance surface. CHILLER ZONE COMPARTMENT DRAWER (Also refer to Temperature Control and Adjusment of fridge on page 8. ) Chiller Zone Compartment Drawer is ideal for storage of fresh fish, meat and easily perishable food like cooked chilled food. In order to best utilise this compartment, we recommend the following; Monitor the temperature using an accurate fridge thermometer to ensure that the storage temperature is in the following range; approximately between -1. 5 degrees C and +3 degrees C. Below thermostat setting positions are suggested to start with; Approximate ambient temperature in the room where the appliance is (degrees C) Suggested thermostat knob setting range * Warning!Do not remove this glass shelf; otherwise Chiller Zone Compartment will not function to specifications. TEMPERATURE CONTROL AND ADJUSTMENT OF FRIDGE Operating temperatures are controlled by the thermostat knob (Fig. 1) and may be set at any position between 1 and 5, 5 being the coldest position. Set the thermostat knob to ensure an average of +5 °C (40°F) is achieved in the fridge and between -1. 5 °C and +3°C is achieved in the Chiller Zone Compartment after 24 hours. 2) shows how you can switch off the appliance completely: Turn the thermostat knob to "0" (Zero) position. The average temperature inside the fridge depends on the following factors: · Ambient temperature in the room (seasonal changes) · Frequency of door opening · Placing hot food inside the product · Position of the product We recommend that you check the temperature with an accurate thermometer to ensure that the storage compartments are kept to the desired temperature. Remember you must take your reading very quickly since the thermometer temperature will rise very rapidly after you remove it from the appliance. Please remember each time the door is opened cold air escapes and the internal temperature rises. Therefore never leave the door open and ensure it is closed immediately after food is put in or removed. In case of a temporary ice build up in the fridge compartment, reduce the thermostat setting to 1. Once the ice build up disappears and the appliance starts auto defrosting again as normal, then you may increase the thermostat setting, if required. 10 degrees C 1 to 2 16 degrees C 1 1/2 to 2 1/2 20 degrees C 2 to 3 25 degrees C 2 1/2 to 3 1/2 32 degrees C 2 1/2 to 4 If above settings could not maintain the required temperatures, then adjust the thermostat knob accordingly; to obtain a colder temperature, turn the thermostat knob towards 5 and vice versa. *Also see factors affecting temperature inside the fridge on page 8 and adjust it accordingly to suit your specific situation. 9 1 2 10 STARTING Final Check Before you start using the refrigerator check that: 1. Clean the interior as recommended under "CLEANING AND CARE. " 4. Insert the plug into the wall socket and switch on the electricity supply. The liquid and gases sealed within the refrigeration system may also give rise to noise, whether the compressor is running or not which is quite normal. 6. We recommend that you set the thermostat knob at 3 (three) and monitor the temperature to ensure the appliance maintains desired storage temperatures (See section Temperature Control and Adjustment). We recommend that you check the temperature with an accurate thermometer (see; Temperature Control and Adjustment). (See Defrosting) DEFROSTING The larder refrigerator defrosts 1 automatically. The defrosting water runs to the drain tube via a collection channel (1) behind the Chiller Zone Compartment drawer and is evaporated in a special container at the back of the appliance (see diagrams). [. . . ] Wait for at least 4 hours to allow the system to settle before switching on. Once the correct storage temperatures have been reached in the appliance, put back all the food. 6 1 4 45 ° 9 7 8 10 8. 30. 13 12 11 15 14 15 16 GUARANTEE DETAILS Your new Beko product is guaranteed against the cost of breakdown repairs for twelve months from the date of the original purchase. · Repairs necessary as a result of faulty materials, defective components or manufacturing defect. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BEKO TLDA662




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BEKO TLDA662 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.