User manual BEKO HBG70

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BEKO HBG70. We hope that this BEKO HBG70 user guide will be useful to you.


BEKO HBG70 : Download the complete user guide (1164 Ko)

Manual abstract: user guide BEKO HBG70

Detailed instructions for use are in the User's Guide.

[. . . ] - This device must be connected to the supply network through either a plug fused 3A or hardwired to a 2 phase spur protected by 3A fuse. In certain circumstances electrical appliances may be a danger hazard. A) Do not check the status of the filters while the cooker hood is operating B) Do not touch bulbs or adjacent areas, during or straight after prolonged use of the appliance. [. . . ] - Position the hood underneath the wall cabinet and fix it into place using 4 screws (not supplied) suitable for the type of cabinet. - Make 4 holes in the wall cabinet referring to the measurements indicated in figures 2 A-2 B. - Hang the hood on the wall, using the 2 holes H, align it in a horizontal position and fix it definitively to the wall using the two lower safety holes I (Fig. For the various installations use screws and screw anchors suited to the type of wall (e. g. If the screws and screw anchors are provided with the product, check that they are suitable for the type of wall on which the hood is to be fixed. The hood is already prepared for the version with which it was ordered. - If the hood is an extractor model, the lever C must be positioned as indicated in Fig. - If the hood is a filter model, the lever C must be positioned as indicated in Fig. · Extractor version The appliance expels the fumes through an outside wall or a duct. It is necessary to buy a telescopic pipe in accordance with the standards in use (inflammable) and connect it to flange D (Fig 1A). The flange D is supplied with the product and should be fixed above the air outlet hole of the hood as indicated in Fig. · Filtering version To transform an extractor hood version into a filter hood version, please inquire with your retailer about purchasing charcoal filters. The filters should be fitted to the extraction assembly inside the hood, by centring them and rotating them 90 degrees, until they click into place (Fig. 4. instructions: - Remove the filters from the cooker hood and wash them in a solution of water and neutral liquid detergent, leaving to soak. · The active carbon filters purify the air that is replaced in the environment. The filters are not washable nor re-useable and must be replaced at maximum every four months. [. . . ] · The labour costs of a Beko approved repairer to carry out the repair What is not covered? · Transit or delivery damage · Accidental damage · Misuse, or abuse. · Cabinet or appearance parts, including knobs and flaps · Accessory items, including ice trays, scrapers, cutlery baskets · Repairs required as a result of unauthorised repairs or inexpert installation that fails to meet the requirements contained in the user instruction book. · Repairs to products used on commercial or non-residential household premises Important notes. · The product is guaranteed for domestic household use only. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BEKO HBG70




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BEKO HBG70 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.