User manual BEKO FNE20921
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BEKO FNE20921. We hope that this BEKO FNE20921 user guide will be useful to you.
Manual abstract: user guide BEKO FNE20921
Detailed instructions for use are in the User's Guide.
[. . . ] Â¢ Keep the manual in an easily accessible place as you may need it later. Â¢ Besides, read also the other documents provided with your product. Symbols and their descriptions This instruction manual contains the following symbols:
C A B
Important information or useful usage tips. Recycling
This product is supplied with the selective sorting symbol for waste electrical and electronic equipment (WEEE). [. . . ] Packaging must be tied with thick tapes and strong ropes and the rules of transportation printed on the package must be followed. Please do not forgetâ¦ Every recycled material is an indispensable source for the nature and for our national resources. If you wish to contribute to recycling the packaging materials, you can get further information from the environmental bodies or local authorities. Clean the interior of the refrigerator as recommended in the âMaintenance and cleaningâ section. The liquid and gases sealed within the refrigeration system may also give rise to noise, even if the compressor is not running and this is quite normal. These areas are designed to be warm to avoid condensation
Before operating your refrigerator
Before starting to use your refrigerator check the following: 1. Is the interior of the refrigerator dry and can the air circulate freely in the rear of it?Plastic wedges will provide the required distance between your refrigerator and the wall in order to allow the air circulation. (The illustrated figure is only an example and does not match exactly with your product. ) 8
Connect your product to a grounded socket which is being protected by a fuse with the appropriate capacity. Important: â¢ The connection must be in compliance with national regulations. The normal storage temperature of your appliance should be -18 Â°C (0 Â°F). Lower temperatures can be obtained by adjusting the thermostat knob towards Position MAX. We recommend checking the temperature with a thermometer to ensure that the storage compartments are kept to the desired temperature. Remember to take the reading immediately since the thermometer temperature will rise very rapidly after you remove it from the freezer. Indicator lights There are three coloured indicator lights located inside the appliance which show the operating mode of the freezer. Amber Indicator Illuminates when the thermostat knob is turned to MAX. position and stays on until the fast freeze operation is deactivated manually. Green Indicator Illuminates when the appliance is connected to the mains and will glow as long as there is electricity present. The green indicator does not give any indication of the temperature inside the freezer. Red Indicator High Temperature Alarm After the appliance is turned on for the first time the alarm is not active for 12 hours (The red LED indicator is switched off). After this period of time the red LED indicator is switched on in the following situations:
-If the appliance is overloaded with fresh food -If the door is left open by mistake. [. . . ] â¢ The refrigerator is adjusted to a very low temperature. Adjust the refrigerator temperature to a warmer degree and wait until the temperature is achieved. Â¢ Door seal of the fridge or freezer may be soiled, worn out, broken or not properly seated. Damaged/broken seal causes the refrigerator to run for a longer period of time in order to maintain the current temperature. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BEKO FNE20921
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BEKO FNE20921 will begin.