User manual BEKO DVG692

[. . . ] If you have any questions especially concerning installation of the dryer - our customer service team will be happy to assist you. Further information and a selection of our products can be found on our web site: www. Com Information Please read and follow these operating and installation instructions and all other information enclosed with the dryer. DANGER - This indicates that death or serious injuries may occur as a result of non observance of this warning. [. . . ] The power cord must meet the following requirements: UL listed in the USA 208 240 volt rated (minimum) 30 amps Type SRDT or DRT (UL 2158) Five feet long (minimum) Strain relief clamp so that the power cord cannot be moved. Attach the power cord ground conductor (green) to the GROUND terminal. Attach the 2 power cord outer conductors (red and black) to the 2 terminals labeled L and the remaining power cord conductor (white) to the terminal labeled N. Tighten all 3 screws (3 Nm) so that the power conductors are held securely in place . Strain relief clamp to make sure that it is tight and cannot be turned. The appliance is now ready to be plugged into the 4 wire receptacle of the power rating. Remove the screws from the cover of the terminal block located at the top rear of the appliance. Attach the 2 power cord outer conductors (red and black) to the 2 terminals labeled L and the remaining power cord conductor (white) to the terminal labeled N. Tighten all 3 screws (3 Nm) so that the power conductors are held in place securely. Strain relief clamp to make sure that it is tight and cannot be turned. To reduce the risk of fire, do not use the ductwork longer than recommended. Do not dry anything that has ever had any type of oil on it (including cooking oils). Items containing foam, rubber or plastic must be dried on a clothes line or by using an Air fluff cycle. Do not store or use solvent detergent boosters or stain remover in the vicinity of the dryer. Do not allowed items containing flammable materials, such as lighters, to remain in clothes while drying. Use the dryer only in the house and for drying normal amounts of laundry for the household. Before using the dryer for the first time Before you use the dryer for the first time: 1. Check that the supply voltage corresponds with the voltage specifications on the rating plate of the dryer, see picture page 25 3. If you intend going on vacation or are not using your dryer for an extended period of time, you should: 1. They provide valuable information as well as limitations about the drying process. Do not dry the following textiles in the dryer: Air tight textiles (e. In principle, the following applies to all drying programs: To ensure a uniform drying result, sort the laundry according to fabric type and drying program. [. . . ] If you are having a problem with your Bosch dryer and are not pleased with the service you have received: First, please contact your installer or the Bosch Authorized Service Contractor in your area and explain to them why you are not satisfied. If after working with your installer or service person the problem still has not been resolved to your satisfaction, please let us know by either writing to us at, BSH Home Appliances 5551 Mc Fadden Avenue Huntington Beach, CA 92649 or, calling us at Please be sure to include, if writing, or have available, if calling, the following information: Model Number Serial Number Date of Original Purchase Date Problem Originated Explanation of Problem Also, if writing, please be sure to include a daytime telephone number and a copy of the sales invoice. You will find the model number and serial number information on the rating plate located on the inside of the front panel. I If you are having a problem with Your dryer, before calling for service please refer to Table on page 24, following. [. . . ]