User manual BEKO DS8539CH

[. . . ] We hope that your product which has been manufactured with high quality and technology will give you the best results. We advise you to read through this manual and the other accompanying documentation carefully before using your product and keep it for future reference. Pay attention to all details and warnings specified in the user manual and follow the instructions given therein. Explanation of symbols Throughout this user manual the following symbols are used: Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. [. . . ] Read the Maintenance and cleaning of filters for detalied information. For models with flue unit: comply with the flue connection instructions and clean the flue. During the drying process, air the room well where your tumble dryer is operating ?On models with heat pump, check the condenser at least every 6 months and clean it if it is dirty. If you are using the environmentallyfriendly filter, you do not need to clean it at every cycle. Replace the filter cloth when the environmentally-friendly filter symbol is displayed on the screen. Follow the instructions in the "Programme selection and consumption table". Audible warning and child lock selection Place the laundry to the drying machine Push and close the loading door. Select the desired program by using On/Off/Program Selection button, the machine will turn on. Selecting the program with the On/Off/ Program Selection button does not mean that the program started. You can dry your heat-resistant cotton textiles A drying setting suitable for the thickness of the products to be dried and the Desired level of dryness should be selected. It dries single layer, casual cotton textiles in the most economical way. You may dry your cotton laundry to be ironed in This program to have them slightly damp for ease 8 You can dry all your synthetic textiles with this Of dryness you desire should be selected. Use this programme to dry non-pigmenting Sports and fitness clothes may be dried with this Use this programme to dry woolen garments Such as jumpers that are washed according to the instructions. In this programme the level of noise emitted To the environment will be the lowest. With this program you can dry your cotton or synthetic You may dry your delicate laundry or laundry With hand wash symbol (silk blouses, thin underwear, etc. ) at low temperature in this You may select from time programmes Between 10 and 160 minutes to achieve the Desired drying level at low temperature. The set time independently from the dryness of This product is available to be used with For products that are Sold without a basket, you can obtain a basket From an authorized service and use the drying For details of use, see You may dry denim pants, skirts, shirts or jackets in this program. Use it to dry your clothes made of synthetics, You can dry your feather or fibre filled textile that Bears can be dried in drier label as a single piece You can dry double duvet, pillow or It dries the shirts in a more sensitive manner, and causes less creasing and easier ironing. The program is where you can dry your washed It provides high hygiene for your textiles via its You can use this programme for your Dry clothes and laundry that you want to Provide with hygiene without washing them. Capacity for the use of the program is 6 Cottons Eco * Cottons Iron dry Synthetics cupboard dry "Cottons Eco programme" used at full and partial load is the standard drying programme to which the information in the label and the fiche relates, that this programme is suitable for drying normal wet Cottons laundry and that it is the most efficient programme in terms of energy consumption for Cottons. * : Energy Label standard program (EN 61121) The values in the table are determined according to the EN 61121 standard. [. . . ] >>> Clean the sponge and filter cloth (if any) in the filter drawer. (For the products with a heat pump) Excessive amount of laundry might be loaded. A program might not be set or Start/Stand-by button might not be pressed. >>> Check that the program is set and it is not in Stand-by position. [. . . ]