User manual BEKO 22WLP530HID

[. . . ] INTEGRATED DIGITAL HD READY COLOUR TELEVISIONS 22WLP530HID Operating Instructions TABLE OF CONTENTS Contents 1 1. Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 2 Disposing of your TV at the end of service life. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 3-Superior features of your integrated digital television. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 4-Receiving digital broadcasting channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 5-Changing the plug. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2. 1-Special Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 3 4 5 6 2. Features of your new television . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3. Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press AV button on your remote control, select ANALOG tab from the SOURCE menu by using Up/Down movement buttons and confirm by pressing the OK button. Select SETUP tab with Down movement button and confirm with OK button. Setup menu is displayed. SETUP SYSTEM CHANNEL FINE TUNE SEARCH PROGRAM NO STORE AUTOPROGRAM BG S06 0 P13 AUTOPROGRAMMING MENU BACK In the Country Selection menu, select the country, whose broadcast you would like to watch in priority, by pressing the right/left movement buttons and start autoprogramming by pressing the OK button. The channels will be automatically searched and those found will be stored in memory starting from the program selected in the Setup menu. At the same moment, the Autoprogram menu will be displayed and a marker indicating the progress of the autoprogramming will appear as shown below. AUTOPROGRAM SEARCHING % 20 MENU STOP To stop the process at any given time, please press the MENU button. The Program Table, which will allow you to sort the channels as you wish, will be displayed after the automatic search is complete. 6. 4. 2-Manual tuning of channels and storing in the memory 6. 4. 2. 1-If you already know the channel number MENU SELECT BACK Select PROGRAM NO tab by pressing the Up/Down movement buttons in Setup menu, enter the channel number to be searched and stored automatically, then select AUTOPROGRAM tab by using the Up/Down movement buttons and press OK button; Country Selection menu will be displayed. Press the MENU button. Move to the SETUP menu by pressing the Down movement button in the Main Menu and confirm your selection with the OK button. Setup menu will be displayed. SETUP SYSTEM CHANNEL FINE TUNE SEARCH PROGRAM NO STORE AUTOPROGRAM BG S06 0 P13 CHANGE MENU BACK 14 Select the system in which you would like to make the search from the SYSTEM tab. Press OK on your remote control to select "S" for cable channels and "C" for channels received via the antenna. Move onto the PROGRAM NO tab and using the number buttons enter the channel number in which you would like to have the channel stored. If the broadcast viewed on the screen is of your desired quality, first move onto the STORE tab with the down movement button to store in the memory the selection you have made and store the channel by pressing the Left or Right movement buttons. The channel will be stored according to the program number of your choice. In the event that you wish to exit the channel settings menu for any reason, simply press the EXIT button. 6. 4. 3-Fine Tuning If the channel you found is not of the desired quality and requires Fine Tuning, then select the FINE TUNE tab by pressing the Down movement button in the Setup menu. Using the Left/Right movement buttons on your remote control, adjust the broadcast displayed on the screen to your desired quality. Under normal circumstances, you will not require to use the Fine Tune function. The AFC values of your television will automatically adjust and lock themselves to the channel. However, you might need it in case the television transmitters do not operate according to the standards. To store in the memory the settings you have made, select the Store tab and press the Right or Left movement button. 6. 4. 4-Program Table Press the MENU button. Move to the PROGRAM TABLE tab by pressing the Down movement button in Main Menu and confirm your selection with the OK button. Program Table menu will be displayed. 6. 4. 2. 2-If you do not know the channel number Press the MENU button. Move to the SETUP menu by pressing the Down movement button in the Main Menu and confirm your selection with the OK button. Select the system in which you would like to make the search from the SYSTEM tab. [. . . ] Test another channel for fine tuning and shadowy pictures Check the antenna system. Disable the child lock. Poor picture quality Antenna may be affected by two connected external devices. Color intensity level is at the lowest setting. Shadow and reflection in the picture. No picture No color. Broadcast system setting (if setting choice is available) Problem in channel broadcasting. Very weak signal Temporary sound mute may be on No or defective teletext No sound Is the sound turned down? [. . . ]