User manual BEKO 22WLM550DHID

[. . . ] Seek for service if any of the above is spilled into the equipment. Do not expose the equipment to extreme temperatures or to direct sunlight, the equipment may overheat and can be damaged. Do not install the equipment near any heat sources such as radiators, heat registers, stoves, or any other apparatus that might produce heat. TV User Guide 2 Safety Instructions IMPORTANT SAFETY INSTRUCTIONS Do not attempt to service the equipment yourself. Opening and removing the covers may expose you to dangerous voltage or any other hazards and may void your warranty. Refer service from qualified personnel. Do not place or drop any other objects on top. [. . . ] Do you wish to re-tune you TV. USING THE FEATURES YES Do It next time NO If you cancelled the first time installation, it will remind you whether to set the first time installation next time Press Cancel : First Time Installation First time installation is not finished!Are you sure to exit? YES Do It next time NO 15 USING THE FEATURES 14 ATV Menu PICTURE menu options Press MENU button on the front panel or LCD-MENU on the remote control to display the main menu. Press button to select the option that you want to adjust in the PICTURE menu. When you are satisfied with your adjustment, press the LCD-MENU button to retun the previous menu or press the EXIT button to exit the main menu. Picture Mode Select picture mode in PICTURE menu. (Available picture mode:Standard, Movie, Sport, Mild, Game. ) If you change the value of Contrast, Brightness, Colour, Tint, Sharpness or Colour temperature on the picture menu, the picture mode will be changed to "Personal" automatically. TIPS : You can press PMOD button on the remote control to select the Picture Mode directly. Contrast Press Contrast button and then use to adjust the contrast of the picture. 28 After adjusting the value you want, press LCD-MENU button to return to the preview MENU. Brightness Press button and then use to adjust the brightness of the picture. Colour Press button and then use to adjust the colour saturation. NOTE: this option is invalid in PC mode, and it will be shown ingray Tint Press button and then use to adjust the tone of colour when your system is in NTSC. USING THE FEATURES Sharpness Press to select the sharpness mode of your TV. (Available Sharpend Mode:Normal, Sharp, Sharpest, Softest, Soft. ) Colour temperature Select an optimum colour temperature mode to suit your eyes for viewing among Normal, Warm and Cold. DNR(Digital Noise Reduction) If thebroadcast signal received is weak, you can select the DNR option to reduce the video noise level between Off, Low, Mid and High. 15 USING THE FEATURES 12 16 SET UP ATV Menu SOUND menu options Press MENU button on the front panel or LCD-MENU on the remote control to display the main menu. Press button to select the option that you want to adjust in the SOUND menu. When you are satisfied with your adjustment, press the LCD-MENU button to return the previous menu or press the EXIT button to exit the main menu. Volume Press Volume button and then use to adjust the sound level. 28 After adjusting the value you want, press LCD-MENU button to return to the preview MENU. Sound Mode Select Sound Mode in SOUND menu. (Available sound mode:Personal, Voice, Music, Theatre. ) If you change the value of Bass and Treble on the Sound menu, the sound mode will be changed to "Personal" automatically. TIPS: You can press SMODE button on the remote control to select the Sound Mode directly. Bass Press Treble Press sounds. USING THE FEATURES USING THE FEATURES button and then use button and then use to increase or decrease the level of the lower-pitched sounds. to increase or decrease the level of the higher-pitched Treble Press button and then use left and right speakers. to increase or decrease the level of the audio output between 17 USING THE FEATURES SET UP ATV Menu SETUP menu options Press MENU button on the front panel or LCD-MENU on the remote control to display the main menu. NOTE:SETUP menus are different for different input sources, if the input source is selected HDMI/ VGA and there are no relative input signal, SETUP menu will be unavailable. Press button to select the option that you want to adjust in the SETUP menu. When you are satisfied with your adjustment, press the LCD-MENU button to retun the previous menu or press the EXIT button to exit the main menu. Country This option allows you to select the country. Auto Tuning This option allows you to tune the channels that can be received automatically. Note:Before you perform Auto Tuning, you must choose the country where you are by selecting Country option. Press OK key to start. USING THE FEATURES Auto Tuning Searching ATV MENU 1 Exit 422. 00MHz You can press LCD-MENU button to stop auto tuning and close the OSD menu. 17 USING THE FEATURES 18 ATV Menu Manual Tuning This option allows you to perform Manual Tuning. NOTE:Before you perform Manual Tuning, you must choose the country where you are by selecting Country optiom. Press button to perform yor selection, the menu of Manual Tuning will display on the screen. Program The current program number. press upper or lower program. Sound System Press to select a corresponding sound system, such as I, DK, BG. [. . . ] When you are satisfied with your adjustment, press the LCD-MENU button to retun the previous menu or press the EXIT button to exit the main menu. Press button to select Manual Search, Press ENTER or button to set the Manual Tuning. USING THE FEATURES Channel The current channel number. Press select the channel directly. to select the upper or lower channel, Press 0~9 to Start Search To select whether to start seaching in begin/searching/finished. Frequency The frequency of current channel. 25 USING THE FEATURES 24 SET UP DTV Menu Program Edit This function allows you to edit the DTV programs according to your preferences, as following: Common Interface If you have inserted the CI card to the TV, you can see the information of the it. USING THE FEATURES 26 12 USING THE FEATURES SET UP EPG Menu EPG(Electronic Programme Guide) options Use EPG button on the remote control to display the EPG menu directly as below: Press to navigate the menu. Press to select the program you want to teleview. Press OK button. When this program begin to play, you will be reminded. USING THE FEATURES 27 12 USING THE FEATURES 26 SET UP DVD SETUP Menu 1. Input mode: DVD. 3. Press to chose items that are going to be set up. Then pres to enter the setup menu. [. . . ]