User manual BEKO 20LB450

[. . . ] ELECTRICAL CONNECTIONS For your own safety read the following instructions carefully before attempting to connect this unit to the mains supply. For your convenience a mains lead and plug with a fuse has been supplied. Should the fuse need to be replaced an ASTA approved BS 1362 fuse of the same rating must be used. In the event of losing the fuse cover the plug must not be used until a replacement fuse cover which must be the same colour as that visible on the pin face of the plug has been fitted. [. . . ] Using the up-down )/( ) you can choose the button - ( number or sign that you want. To move onto the second character of the name, use the right-left movement ( )/( ) and again with the up-down movement buttons ( )/( ) assign the program the letter, number or sign of your choice. Once you have completed all the characters, press the "Yellow" to store. To write names for any of the other programs, simply repeat the above procedure. To exit at any given stage, simply press the ( ) button. -14- Setting up the Sound Menu Sound type Your television has the ability to receive NICAM Stereo transmission. If the program you are viewing is available in stereo, then this will be indicated with STEREO on screen display. Spatial To give further "depth" to the sound of the program you are watching, select "Spatial" using right movement button ( ) in Sound Mode. You can control the sound settings of your television by using the ( ) and ( ) buttons on your remote control or the buttons directly on your television. To set up other features of the sound menu, press the ( ) button on your remote control. Select the SOUND menu bar in blue, press the ( ) button and the SOUND menu will appear on screen. Using the up-down movement buttons ( )/( ) you can choose the features that you require. Balance In order to balance the level of sound between the right and left speaker of the television, use the down movement button ( ) to highlight the BALANCE mode in white and by using the right left buttons ( )/( ), you can adjust the balance. -15- Equalizer Highlight "EQUALIZER" in the SOUND MENU, press the ( ) button bringing the equalizer setting function on screen. Using the up-down movement ( )/( ) buttons you choose between a series of preset settings for different types of sound output such as Music, Sports, Cinema and Speech. Also you have the Personal 1 and Personal 2 option settings which can be adjusted in accordance to your preferences. Please note: If you turn your television off from the main power supply switch then the sleep timer modes selected will cancelled. By pressing the ( ) button on your remote control, you have the ability to change the picture format of the screen. If you leave the screen format function on AUTO then the program that you are viewing will be shown in either 4:3 or 16:9 format depending on the transmission broadcast. A black band may be present top and bottom of the picture dependant on the broadcast this is not a fault. TIME SELECT ON TIME SELECT OFF TIME In the FEATURES MENU use the numeric buttons to enter the time. The time that is stored here will be used as the basis in all activities based within the TIMER mode. Please Note: The time will be reset when you turn off your television, but will adjust itself to the time of any channel with Teletext once you switch on your television again, getting the necessary information from the transmission. In the FEATURES MENU highlight the TIMER option and press ( ), which will bring the SLEEP TIMER menu on screen. With this function, you will have the ability to automatically turn your television on or off at the time of your choice, or enable your television to shift from one channel to another at a time of your choice. Picture Format SLEEP TIMER Mode -18- Using Teletext Teletext is an information system that displays text on your TV screen. Using the teletext control buttons you can view pages of information that are listed in the teletext index. The contrast, brightness and colour cannot be changed but the volume control is still available. TV/text mix To view a TV programme whilst in text mode, press the ( ) button. Press the ( ) button again to return to the text page. To enter Text mode Please Note: Make sure the TV channel you are watching transmits teletext. [. . . ] When switched to this mode, the VOL+/VOL- and MUTE buttons will be functional. NOTE 2: When the unit is in monitor mode, the Stand-by button is functional. When the unit is switched back on from the stand-by function, it will open in the TV mode. PC Mode MENU structure When you press the ( ) button on your remote control while the unit is in the PC mode, the features available in the PC mode will appear on screen as the PC MENU. [. . . ]