User manual BEKO 15WLP530HID

[. . . ] INTEGRATED DIGITAL HD READY COLOUR TELEVISIONS 15WLP530HID Operating Instructions TABLE OF CONTENTS Contents 1 1-Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 3-Superior features of your integrated digital television. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 4-Receiving digital broadcasting channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 5-Changing the plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] You can change the password as you wish under Change PIN item in the Access Control menu. 14 6. 3. 6. 3-User Interface Options From this menu, you can decide whether to display the scrambled channels in the program table or not. If List Scrambled Channels is set to ON, all channels will be displayed, if it is set to OFF, scrambled channels will not be displayed and if it is set to AUTO and a CI card is installed to your television, then the scrambled channels supported by the card will be displayed. confirm by pressing the OK button. Select SETUP tab with Down movement button and confirm with OK button. Setup menu is displayed. SETUP SYSTEM CHANNEL FINETUNE SEARCH PROGRAMNO STORE AUTOPROGRAM I S06 0 P13 6. 3. 6. 4-Timers In this menu you can view Reminders you had entered from the EPG or change or delete the entered Reminders. 6. 3. 6. 5-Favourite Lists Please see 6. 3. 4. 2-Creating favorite channel list, for detailed explanation of this feature. SELECT BACK 6. 3. 6. 6-Common Interface Module In this menu, you can make the CI Module settings that you can attach to your television. 6. 3. 6. 7-System Menu You can display your television's hardware and software data under this menu. Select PROGRAM NO tab by pressing the Up/Down movement buttons in Setup menu, enter the channel number to be searched and stored automatically, then select AUTOPROGRAM tab by using the Up/Down movement buttons and press OK button; Country Selection menu will be displayed. COUNTRYSELECTION BELGIUM CZECHREP. DANMARK DEUTSCHLAND ELLADA ESPANA FRANCE HUNGARY IRELAND ITALIA NETHERLANDS NORGE ÖSTERREICH POLSKA PORTUGAL SCHWEIZ SUOMI SVERIGE TÜRKYE U. K. . . . . . . . . . . . . . . . . . . . . . . . . . . 6. 4-Performing Analog Tunings You can either tune the Analog channels automatically or manually and store them in your television. 6. 4. 1-Automatic tuning of channels and storing in the memory Note: If your television does not receive any antenna broadcast for a period of 5 minutes, it automatically switches to the stand-by position. The countdown OSD is displayed on the screen during the last 1 minute (applicable for Analog mode only) You can tune the programs automatically with the Autoprogram function of your television and then sort the channels as you desire by means of the Program Table. Press AV button on your remote control, select ANALOG tab from the SOURCE menu by using Up/Down movement buttons and STARTAUTOPROGRAMMING BACK In the Country Selection menu, select the country, whose broadcast you would like to watch in priority, by pressing the right/left movement buttons and start autoprogramming by pressing the OK button. The channels will be automatically searched and those found will be stored in memory starting from the program selected in the Setup menu. At the same moment, the Autoprogram menu will be displayed and a marker indicating the progress of the autoprogramming will appear as shown below. AUTOPROGRAM SEARCHING %20 STOP 15 To stop the process at any given time, please press the MENU button. The Program Table, which will allow you to sort the channels as you wish, will be displayed after the automatic search is complete. 6. 4. 2. 2-If you do not know the channel number Press the MENU button. Move to the SETUP menu by pressing the Down movement button in the Main Menu and confirm your selection with the OK button. Select the system in which you would like to make the search from the SYSTEM tab. Press OK on your remote control to select "S" for cable channels and "C" for channels received via the antenna. Select SEARCH tab using the Up/Down movement buttons, and scan the channels in ascending order with Right movement button and in descending order with Left movement button. Then store it in the memory by pressing the Right or Left movement buttons. Repeat the same procedure for other channels by selecting the program number of your choice from the PROGRAM NO tab. If the channel you found is not of the desired quality and requires Fine Tuning or if you would like to rename the channel, refer to the relevant sections. 6. 4. 2-Manual tuning of channels and storing in the memory 6. 4. 2. 1-If you already know the channel number Press the MENU button. Move to the SETUP menu by pressing the Down movement button in the Main Menu and confirm your selection with the OK button. Setup menu will be displayed. SETUP SYSTEM CHANNEL FINETUNE SEARCH PROGRAMNO STORE AUTOPROGRAM I S06 0 P13 CHANGE BACK Select the system in which you would like to make the search from the SYSTEM tab. Press OK on your remote control to select "S" for cable channels and "C" for channels received via the antenna. Move onto the PROGRAM NO tab and using the number buttons enter the channel number in which you would like to have the channel stored. [. . . ] If you are using a satellite antenna, is it well adjusted? Solution Check the power cable. Test another channel for fine tuning and shadowy pictures Check the antenna system. Disable the child lock. Poor picture quality Antenna may be affected by two connected external TV. Colour intensity level is at the lowest setting. Shadow and reflection in the picture. No picture No colour. Broadcast system setting (if setting choice is available) Problem in channel broadcasting. [. . . ]