User manual AVIOM 6416M

[. . . ] Mic Input Module 6416m RCI Remote Control Interface Mic Control Surface User Guide P/N 9310 1013 0001F rev. 1. 00 © 2008 Aviom, Inc. Certifications ETL/cETL Listed EMC: Conforms to: Certified to: RoHS Status: EN 55103-1, EN 55103-2, SAA AS/NZS 1053 IEC 60065, EN 60065, UL 60065 CAN/CSA E60065, KETI RoHS compliant Notice of Rights All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means--electronic, mechanical, photocopy, recording, or otherwise--without written permission of Aviom, Inc. Trademarks Aviom and the Aviom logo are trademarks of Aviom, Inc. Printed in USA ii WARNING! NO USER SERVICEABLE PARTS INSIDE ! REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY · To reduce the risk of fire or electrical shock, do not expose this product to rain or other types of moisture. [. . . ] The red LED in the Save button and the one between the Enter/Cancel buttons will flash. Also, the Edit button associated with theCONTROL memory MASTER Mute Mute Mute Mute Mute Mute Mute location last accessed for preset Mute or recall will flash. save 6416m Link + 48V Mute Edit Edit Mute Edit VDC SLOT Mute Ø Pad + 48V Mute Edit Mute Edit Select a memory location to Ø store the Preset inØby pressing one of the 16 Ø Ø Edit buttons on the front panel of the 6416m. Press EntEr to complete Pad Pad Pad Pad the operation or press CanCEl to exit without storing a Preset. Edit Lock + 48V Mute Edit Mute + 48V Mute Edit Mute Edit Mute Edit Edit +48V Link Link Managed Ø Pad +48V ASSIGN PORT RS-232 MIDI In MIDI Out Edit GPIO In GPIO Out CANCEL Ø 5 6 Pad + 48V Ø 7 8 Pad + 48V Ø 9 10 Pad + 48V Ø 11 12 Pad +48V 13 ENTER 14 15 SAVE Edit Edit Edit Edit Edit Edit RECALL Edit Edit Phase Edit Low Cut Pad + 48V 8 9 10 11 As an example, to save the Preset to location 8, press Save, then Edit button #8, 12 followed by 13 Enter button. the 14 15 16 Gain (dB) SAVE Saving a Preset from Phase 6416m front panel saves the preset in flash the RECALL Low Cut Pad + 48V memory in the local 6416m only. Saving a preset from the MCS will save the same-numbered Preset in all 6416m modules set to the same Control Group, making configuration of larger systems simple and intuitive. 6416M front PAnel 53 P Note: To save a mic preamp Preset from the MCS, remember that the 6416m needs to be set to the same Control Group as is currently selected on the RCI that the MCS is connected to. Recall a Preset To recall a mic preamp Preset from the front panel of the 6416m, press the rECall button. The Recall button's red LED, the Enter/Cancel LED, and the Edit button corresponding to the last Preset saved/recalled will flash. Choose the memory location that contains the desired Preset by pressing the corresponding channel Active button. Press EntEr to complete the operation and load the Preset, or press the CanCEl button to exit without recalling a Preset. Recalling a preset will overwrite all channel parameters as described above; save a mic preamp Preset first if you want to recall the current settings at a later time. When a Preset is recalled, audio is muted briefly (a few milliseconds) while the settings are changed. This is desirable, especially when large gain changes or changes to pad and phantom power settings are included in a Preset. Remember that when using the MCS Mic Control Surface to recall a mic preamp Preset, the 6416m needs to be set to the same Control Group as the RCI/MCS combination. Using the MCS to recall a Preset causes all 6416m preamps in the same Control Group to recall the same-numbered Preset simultaneously. Preset Rules When saving or recalling a mic preamp Preset from the front panel of an individual 6416m Mic Input Module, only that module is affected. For example, to save the channel strip settings for a 64-input system that includes four 6416m mic modules in a network without an RCI/MCS combination, you need to perform the save/recall operation on each module separately. The Control Group has no bearing on the preset save/recall function when a preset is saved or recalled from the 6416m front panel. When an RCI Remote Control Interface and MCS Mic Control Surface are part of a Pro64 network, the setting of the Control Group will affect the behavior of the save/recall functions. Only modules set to the same Control Group can be addressed from the RCI/MCS combination. When a Preset is saved (or recalled) from the RCI/MCS combination, all 6416m modules set to the same Control Group will save or recall the same numbered Preset simultaneously. 54 6416M front PAnel 6416m Rear Panel Features All 6416m rear-panel features and functions are described in this section. AC Power Pro64 modules use switching power supplies that can operate at 100-240V and from 50-60Hz, meaning that they can be used with most of the world's AC power systems by simply changing the line cord. The 6416m is equipped with a standard grounded IEC power inlet (with fuse), which can accept the interchangeable IEC power cord. Fuse The fuse holder is spring-loaded and has space for two fuses, one main and one spare (optional). When checking or replacing a fuse, always power off the Pro64 unit and 16 15 14 12 remove the line cord from the AC power source. [. . . ] Settings Specifications 107 6416m Specifications Channels XLR Inputs Passive Splitter/ Alternate Inputs Differential Input Impedance Input Gain Range Maximum Input Level resulting in 0dBFS 16 inputs Mic- or line-level Pin 1: Shield; Pin 2: Hot; Pin 3: Cold DB25 multipin; audio pinout 3. 6k ohms 0­55dB, variable, in 1dB increments 0dB gain, Pad on = +24dBu 0dB gain, Pad off = 0dBu 55dB gain, Pad on = -31dBu 55dB gain, Pad off = -55dBu -24dB, switchable per channel Per channel; -3dB @ 85Hz, 18dB per octave +48V, individually selectable per channel 16; saves all channel strip audio parameters 1x: 39. 7­52kHz; 2x: 79. 4­104kHz; 4x: 158. 8­208kHz 24-bit resolution Pad Low Cut Filter Phantom Power Preset Memory Sample Rates Frequency Response +/- 0. 3dB 20-23kHz at 48kHz +/- 0. 3dB 20-45kHz at 96kHz +/- 0. 3dB 20-53kHz at 192kHz -3dB @ 2Hz (at all sample rates) 0. 0015% @ 1. 0kHz, -10dBFS 0. 007% @ 1. 0 kHz, -1dBFS 112dB -110dB @ 1kHz, 35dB gain -127dBu 78dB @ 1. kHz / 75dB @ 10kHz, typical MIDI In, MIDI Out 5-pin DIN RS-232 DB9 connector; DIP switch configuration GPIO In (x4), Out (x4); terminal block connectors; DIP switch configuration; TTL or isolated THD +N Dynamic Range (noise floor) Crosstalk Equivalent Input Noise (EIN) CMRR (common mode rejection ratio) Virtual Data Cables 108 Specifications A-Net A-Net Cable Length Latency Maximum Ambient Operating Temperature Power Supply 2 EtherCon RJ45 connectors 400 feet (120 meters) Cat-5e between devices Analog input to analog output: <800µs +50°C 100­240VAC 50­60Hz, 55W Internal switching type; IEC connector Backup DC Power 24VDC +/-5%, 1. 6A typical, 2. A max. 4-pin XLR Pin 1: Ground; Pin 2/3: no connect; Pin 4: 24VDC Capable of sourcing 5A of in-rush current for 5ms (0. 1ms rise time) Dimensions Weight 3U; 19"w x 13"d x 5. 25"h (482. 6 x 330. 2 x 133 . 3 mm) 15 pounds (5. 44 kg) All Aviom products are designed and manufactured in the U. S. A. Specifications 109 Dimensions - 6416m 110 Specifications Specifications 111 RCI Specifications Controller Port Headphone Monitor Monitor Output XLR Output XLR Output Pad XLR Max. A-Net A-Net Cable Length Power Supply Backup DC Power Front panel; EtherCon RJ45, Accepts MCS 1/4-inch TRS, mono, with level control XLR jack, balanced line level, mono Pin 1: Shield; Pin 2: Hot; Pin 3: Cold 21dB +4dBu (Pad off), -17dBu (Pad on); rear-panel switch 50°C 2 EtherCon RJ45 connectors 400 feet (120 meters) Cat-5e between devices 100-240VAC, 50-60Hz, 16W Internal switching type; IEC connector 24VDC +/-5%, 0. 55A typical, 1. A max. 4-pin XLR Pin 1: Ground; Pin 2/3: no connect; Pin 4: 24VDC 1U: 19"w x 8"d x 1. 75"h (482. 6 x 203 x 44 mm) 7 pounds (3. 17 kg) Dimensions Weight 112 Specifications Dimensions - RCI Specifications 113 114 Specifications MCS Specifications Controller Port Channel Level High Resolution Meter Peak Hold Gain Control Channel Controls EtherCon RJ45, Connects to RCI 64 bicolor LEDs 10-segment, -48 to 0dB On/Off Rotary, per channel, in 1dB steps Phase On/Off Low Cut Filter On/Off 24dB Pad On/Off +48V Phantom Power On/Off Mute On/Off Save/recall 16 presets; stored in the 6416m Mic Input Module 400 feet (120 meters) Cat-5e between devices 6"w x 5"d x 1. 5"h (152. 4 x 127 x 38. 1 mm) 2 pounds (0. 91 kg) Preset Management Cable Length between the RCI and MCS Dimensions Weight: Specifications 115 Dimensions - MCS 116 Specifications Specifications 117 Mounting the MCS The underside of the MCS has two keyhole openings that allow the MCS to be attached to another surface using only two screws (not included). [. . . ]