User manual ATLINKS BILOBA 250G

[. . . ] Take care when choosing the location of the base, as the quality of communications depends on it. In particular avoid placing it near the following: window, reinforced concrete, large metal object, television set, fluorescent tube, halogen lamp, burglar alarm unit, Hi-Fi system, etc. ! The range of your telephone varies according to its environment. Obstacles such as thick walls and metal structures can alter the range. To optimise the range, you can alter the direction of the base and its aerial. BILOBA250gb. qxd 07/12/00 12:14 Page 4 4 1. 2 l PREPARING THE BASE Connect the telephone cable and the power supply cable to the rear of the base as shown. mains power cable telephone cable l l l Secure the stand to the base, under the cables. Connect your telephone jack to the telephone socket. Connect the mains adapter to a 230V/50 Hz power outlet. 4 The green led shows that the base is powered. l Extend the telescopic aerial on the base. BILOBA250gb. qxd 07/12/00 12:14 Page 5 5 1. 3 PREPARING THE HANDSET Connect the battery l Open and remove the battery compartment cover. [. . . ] ORGANISING YOUR ADDRESS BOOK The telephone enables you to use a 10-contact address book. Each contact page can be used to memorise the phone numbers of your usual correspondents. You can create, modify, delete contact pages and make calls directly from the address book. 5. 1 l CREATING A CONTACT PAGE Access the address book by pressing and holding the beep. key until you hear a long confirmation l Enter the telephone number using the numerical keys on the keypad (to insert a pause, use the key, to insert a flash, use the key). key and then choose the number of the contact page to be created l l 4 A confirmation tone is heard. NOTA : Recording a new number in a contact page which already had one will delete the previous record. The address book can contain up to 10 contact pages, with each contact page comprising a number of up to 20 digits and/or characters. BILOBA250gb. qxd 07/12/00 12:14 Page 13 13 5. 2 l l l MODIFYING A CONTACT PAGE A contact page is modified by re-recording a new number in the page which already contains one. Access the address book by a long press on key until a long confirmation beep is heard. Enter the new telephone number with the numerical keys on the keypad (to insert a pause, use the key, to insert a flash, use the key). key and then choose the number of the contact page to be created (0 l l 4 A confirmation tone is heard. BILOBA250gb. qxd 07/12/00 12:14 Page 14 14 5. 3 l l DELETING A CONTACT PAGE Access the address book by a long press on key Press the until a long confirmation beep is heard. key then choose the contact page number to be deleted (from 0 to 9). 4A confirmation tone is heard. 4The contact page is empty. BILOBA250gb. qxd 07/12/00 12:14 Page 15 15 5. 4 CALLING A CORRESPONDENT RECORDED IN THE ADDRESS BOOK To call a correspondent recorded in the address book, there are 2 possible ways: F access address book then enter page number (0 to 9) or use the arrows to move from one page to another establish communication hang up at end of communication F obtain a line access address book type in page number (0 to 9) 0432455002 the number memorised is automatically dialled the communication is established hang up at end of communication BILOBA250gb. qxd 07/12/00 12:14 Page 16 16 6. CONSULT CALLER LOG * With a subscription to the caller identification service, received. will compile a list of the last 10 calls Example : Figure "3" means that you have 3 new calls in your log since the last time you checked it. The icon means that you have messages if you have subscribed to the "TOP MESSAGE" service*. To access this list l Press the key. 4 If the list is empty, 1 beep is heard. 4 If calls have been recorded, the screen displays: l l the date and time of the call the number of times the person called (9 is the maximum number displayed) the number of the person who called you. l ! The calls are listed from most recent to oldest. * Provided that you have subscribed to this service with your operator. BILOBA250gb. qxd 07/12/00 12:14 Page 17 17 6. Press the key to confirm. NOTE : If you make a mistake, a beep is heard and the date/time entry screen waits for a correct value. BILOBA250gb. qxd 07/12/00 12:14 Page 22 22 8. and keys can be used to access additional services (find out from your operator TOP MESSAGE* is compatible with the France Télécom Top Message service. You can forward your calls to a voice mailbox. l l If you have a message in your voice mailbox, the screen displays the Access the voice mailbox as indicated by France Télécom. icon. ! Once on-line, you will be guided by the France Télécom mail service. * BILOBA250gb. qxd 07/12/00 12:14 Page 23 23 9. USING YOUR TELEPHONE WITH MORE THAN ONE HANDSET 9. 1 Each l ADDING A NEW HANDSET base station can recognise up to 3 additional handsets. to register your extra handset with the base. Press 4 If you hear the tone, the handset is registered, if not, an error beep is heard. l In this case, place the handset on the base to be used. 4 The handset emits a double tone: a charge beep followed by a handset registration beep. BILOBA250gb. qxd 07/12/00 12:14 Page 24 24 10. IDENTIFYING YOUR HANDSET TO ANOTHER BILOBA BASE To change the base with which the handset is associated: l Press to obtain a line. If you have no tone l Place the handset on the new base. 4 A short beep then a long beep confirm identification. If you still have no tone You can: l l l Long press key Press key . . Place the handset on the new base. 4 The handset emits a short beep then a long confirmation beep. BILOBA250gb. qxd 07/12/00 12:14 Page 25 25 11. OTHER SETTINGS THE KEY This key is used to access the network services. Three durations are possible: 270 ms, 115 ms or 100 ms. l l l Long press Press Press l l l until a long confirmation beep is heard. , or to select the time-delay: 1 : 100 ms 2 : 115 ms 3 : 270 ms. l A confirmation beep is heard. ! By default, the time-delay is 270 ms. BILOBA250gb. qxd 07/12/00 12:14 Page 26 26 12. [. . . ] If not connected to the mains power or if there is a mains power failure, work. You will then be unable to make or receive calls in the event of an emergency. can no longer This is why we recommend that you also have an ordinary telephone designed for connection to a conventional TRT3 telephone line. The handset battery must be disposed of in compliance with waste regulations. ! Do not use your telephone to notify a gas leak when standing close to this leak. This telephone is built in compliance with European directives 73/23/CEE and 89/336/CEE. BILOBA250gb. qxd 07/12/00 12:14 Page 29 29 12. 4 MAINTENANCE Clean your telephone with a lightly moistened antistatic cloth. [. . . ]