User manual ASUS TS300-E4/PX4

[. . . ] Specifications and information contained in this manual ae furnished for informational use only, and are subject to change at any time without notice, and should not be construed as a commitment by ASUS. ASUS assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual, including the products and software described in it. Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe. ii Contents Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Configuration options: [Auto] [SWDMA0~2] [MWDMA0~2] [UDMA0~6] SMART Monitoring [Auto] Sets the Smart Monitoring, Analysis, and Reporting Technology. Configuration options: [Auto] [Disabled] [Enabled] 32Bit Data Transfer [Enabled] Enables or disables 32-bit data transfer. Configuration options: [Disabled] [Enabled] 5. 3. 5 IDEConfiguration The items in this menu allow you to set or change the configurations for the IDE devices installed in the system. Select an item then press <Enter> if you wish to configure the item. Main IDEConfiguration ATA/IDEConfiguration ConfigureSATAas [Enhanced] [IDE] BIOS SETUP UTILITY Options Disable Compatible Enabled HardDiskWriteProtect [Disabled] IDEDetectTimeOut(Sec) [35] ATA(PI)80PinCableDetection Host] [ Select Screen Select Item +- Change Option F1 General Help F10 aveandExit S ESC xit E v02. 58(C)Copyright1985-2007, AmericanMegatrends, Inc. ATA/IDEConfiguration[Enhanced] Disables or allows selection of the IDE operation mode depending on the operating system (OS) that you installed. Set to [Enhanced Mode] if you are using native OS, such as Windows® 2000/XP/Vista. Set to [Compatible Mode] if you are using legacy OS, such as Windows® ME/98/NT and MS-DOS. Configuration options: [Disabled] [Compatible Mode] [Enhanced Mode] ASUS TS300-E5 5-13 Configure SATA as [IDE] Set the SATA configuration. Configuration options: [IDE] [RAID] [AHCI] Hard Disk Write Protect [Disabled] Enables or disables the device write protection. Configuration options: [Disabled] [Enabled] IDE Detect Time Out (Sec) [35] Selects the time out value for detecting ATA/ATAPI devices. Configuration options: [0] [5] [10] [15] [20] [25] [30] [35] ATA(PI) 80Pin Cable Detection [Host] Selects the mechanism for detecting 80Pin ATA(PI) Cable. Configuration options: [Host & Device] [Host] [Device] 5. 3. 6 System Information This menu gives you an overview of the general system specifications. Configuration options: [Disabled] [Enabled] Max CPUID Value Limit [Disabled] Enable this item to boot legacy operating systems that cannot support CPUs with extended CPUID functions. Configuration options: [Disabled] [Enabled] Vanderpool Technology [Enabled] The Vanderpool Technology allows a hardware platform to run multiple operating systems separately and simultaneously, enabling one system to virtually function as several systems. Configuration options: [Disabled] [Enabled] CPU TM function: [Enabled] This function enables the overheated CPU to throttle the clock speed to cool down. Configuration options: [Disabled] [Enabled] ASUS TS300-E5 5-19 Execute Disable Bit [Disabled] When disabled, forces the XD feature flag to always return to 0. Configuration options: [Disabled] [Enabled] PECI [Disabled] Allows you to enable or disable the PECI. Configuration options: [Enabled] [Disabled] Core Multi-Processing [Enabled] Allows you to enable or disable one exeucation core. Configuration options: [Disabled] [Enabled] Intel (R) SpeedStep (tm) tech. [Enabled] When set to [Disabled], the CPU runs at its default speed. When set to [Enabled], the CPU speed is controlled by the operating system. Configuration options: [Enabled] [Disabled] 5. 4. 6 ChipsetConfiguration The Chipset Configuration menu allows you to change the advanced chipset settings. Select an item then press <Enter> to display the sub-menu. Advanced Advanced Chipset Settings WARNING: Setting wrong values in below sections may cause system to malfunction. [. . . ] Click Cancel to close this window. 3. Click the item XGI VOLARI Z9s from the Drivers menu. 4. The XGI VOLARI Z9s window appears. Follow screen instructions to complete installation. ASUS TS300-E5 7-21 7. 3. 2 Red Hat® Enterprise The Red Hat® Enterprise operating system automatically recognizes the XGI Graphics driver during system installation. There is no need to install an additional driver(s) to support the onboard VGA. 7-22 Chapter 7: Driver installation 7. 4 7. 4. 1 1. 2. LAN driver installation Windows® Server This section provides instructions on how to install the Broadcom BCM5721 LAN controller driver. [. . . ]