User manual ASUS RS700-E7/RS4-C

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ASUS RS700-E7/RS4-C. We hope that this ASUS RS700-E7/RS4-C user guide will be useful to you.


ASUS RS700-E7/RS4-C : Download the complete user guide (6308 Ko)

Manual abstract: user guide ASUS RS700-E7/RS4-C

Detailed instructions for use are in the User's Guide.

[. . . ] RS700-E7/RS4-C 1U Rackmount Server User Guide E7393 First Edition April 2012 Copyright © 2012 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. ASUS provides this manual “as is” without warranty of any kind, either express or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose. In no event shall ASUS, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profits, loss of business, loss of use or data, interruption of business and the like), even if ASUS has been advised of the possibility of such damages arising from any defect or error in this manual or product. [. . . ] Configuration options: [Disabled] [Enabled] No Snoop [Enabled] Enables or disables PCI Express device No snoop option. Configuration options: [Disabled] [Enabled] 5-24 Chapter 5: BIOS setup Maximum Payload [Auto] Set Maximum Payload of PCI Express device or allow system BIOS to select the value. Configuration options: [Auto] [128 Bytes] [256 Bytes] [512 Bytes] [1024 Bytes] [2048 Bytes] [4096 Bytes] Maximum Read Request [Auto] Set Maximum Read Request of PCI Express device or allow system BIOS to select the value. Configuration options: [Auto] [128 Bytes] [256 Bytes] [512 Bytes] [1024 Bytes] [2048 Bytes] [4096 Bytes] PCI Express Link Register Settings ASPM Support [Disabled] Allows to set the ASPM level. Configuration options: [Disabled] [Auot] [Force L0s] [Force L0s] Force all links to L0s state. [Disabled] Disabled ASPM. Extended Synch [Disabled] If Enabled allows generation of Extended synchronization patterns. Configuration options: [Disabled] [Enabled] Link Training Retry [8] Defines number od retry attempts software will take to ratrain the link if previous training attempt was unsuccessful. Configuration options: [Disabled] [2] [3] [5] [8] Link Training Timeout (uS) [250] Use the <+> and <-> keys to adjust the value. The values range from 10 to 1000 uS with a 10 interval. Unpopulated Links [Keep Link ON] In order to save power, software will disable unpopulated PCI Express links, if this option set to Disabled. Configuration options: [Keep Link ON] [Disabled] ASUS RS700-E7/RS4-C 5-25 PCI Express GEN2 Device Register Settings Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced PCI Express GEN2 Device Register Settings Completion Timeout [Default] ARI Forwarding [Disabled] Atomic0p Requester Enable [Disabled] Atomic0p Egress Blocking [Disabled] ID0 Request Enable [Disabled] ID0 Completion Enable [Disabled] LTR Mechanism Enable [Disabled] End-End TLP Prefix Blocking [Disabled] PCI Express GEN2 Link Register Target Link Speed Clock Power Management Compliance SOS Hardware Autonomous Width Hardware Autonomous Speed In device Functions that support Completion Timeout programmability, allows system software to modify the Completion Timout value. If ‘Shorter’ is selected, software will use shorter timeout ranges supported by hardware. If ‘Longer’ is selected, software will use. [Auto] [Disabled] [Disabled] [Enabled] [Enabled] →←: Select Screen ↑↓: Select Item Enter: Select Item +/-: Change Opt. F1: General Help F2: Previous Values F5: Optimized Defaults F10: Save & Exit ESC: Exit Version 2. 14. 1219. Copyright (C) 2011 American Megatrends, Inc. Completion Timeout [Default] In device Functions that support Completion Timeout programmability, allows system software to modify the Completion Timout value. If ‘Shorter’ is selected, software will use shorter timeout ranges supported by hardware. If ‘Longer’ is selected, software will use. Configuration options: [Default] [Shorter] [Longer] [Disabled] ARI Forwarding [Disabled] If supported by hardware and set to ‘Enabled’, the Downstream Port disables its traditional Device Number field being 0 enforcement when turning a Type 1 Configuration Request into a Type 0 Configuration Request, permitting access to Extended Functions in ab ART Device immediately below the port. Configuration options: [Disabled] [Enabled] Atomic0p Requester Enable [Disabled] If supported by hardware and set to ‘Enabled’, this function initistes Atomc0p Requests only if Bus Master Enable bit is in the Command Register set. Configuration options: [Disabled] [Enabled] Atomic0p Egress Blocking [Disabled] If supported by hardware and set to ‘Enabled’, outbound Atomic0p Requests via Egress Ports will be blocked. Configuration options: [Disabled] [Enabled] ID0 Request Enable [Disabled] If supported by hardware and set to ‘Enabled’, this permits setting the number of ID-Based Ordering (ID0) bit (Attribute [2]) requests to be initiated. Configuration options: [Disabled] [Enabled] 5-26 Chapter 5: BIOS setup ID0 Completion Enable [Disabled] If supported by hardware and set to ‘Enabled’, this permits setting the number of ID-Based Ordering (ID0) bit (Attribute [2]) requests to be initiated. Configuration options: [Disabled] [Enabled] LTR Mechanism Enable [Disabled] If supported by hardware and set to ‘Enabled’, this enables the Latency Tolerance Reporting (LTR) Mechanism. Configuration options: [Disabled] [Enabled] End-End TLP Prefix Blocking [Disabled] If supported by hardware and set to ‘Enabled’, this function will bolck forwarding of TLPs containing End-End TLP Prefixes. [. . . ] To install the ASPEED VGA driver: 1. 2. Insert the motherboard/system support DVD to the optical drive. The support DVD automatically displays the Drivers menu if Autorun is enabled in your computer. If Autorun is NOT enabled in your computer, browse the contents of the support DVD to locate the file ASSETUP. EXE from the BIN folder. Double-click the ASSETUP. EXE to run the support DVD. Restart the computer, and then log on with Administrator privileges. 3. Click the ASPEED AST2300 Display Driver to begin installation. 4. Click Next to start the installation. ASUS RS700-E7/RS4-C 7-21 5. Toggle I accept the terms in the license agreement and click Next to continue. 6. Enter the user information and click Next to continue. 7. Select a setup type and click Next to continue. 7-22 Chapter 7: Driver installation 8. Click Install to start driver installation. 9. When the installation completes, click Finish to restart your computer before using the program. ASUS RS700-E7/RS4-C 7-23 7. 5  Intel® C600 Series Chipset SCU SATA RAID Drivers This section provides the instructions on how to install the Intel® C600 Series Chipset SCU SATA RAID Drivers on the system. You need to manually install the Intel® C600 Series Chipset SCU SATA RAID Drivers on a Windows operating system. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ASUS RS700-E7/RS4-C




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ASUS RS700-E7/RS4-C will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.