User manual ASUS R700T QUICK START GUIDE

[. . . ] The second square is extinguished after entry of the second digit, etc. The unit switches on automatically after entry of the 4th digit, if this and all other digits have been correctly entered. 1RWH It is essential that the CODE CARD be kept in a safe place outside the vehicle. The accompanying sticker should be attached to the inside of the vehicle windscreen/ window. If an incorrect code number is entered, the prompt &2'( with the four stars is displayed again. [. . . ] In addition, an inverse TP will appear on the display to indicate the activated traffic programme. 67 5DGLR 2SHUDWLRQ $FWLYDWLQJTXLWWLQJ WKH 73 PHQX $FWLYDWLQJPress and hold the button for longer than 2 seconds. 4XLWWLQJ Press and hold the button; otherwise, the TP menu will automatically disappear after 8 seconds if no further operations are performed. 6HWWLQJ DXWRPDWLF WUDFNLQJ Press multifunction button "73" repeatedly in the TP menu until 21 appears. , PSRUWDQW If a TP transmitter has previously been directly programmed, it will once again be selected as TP transmitter. Quitting the TP menu. 6HWWLQJGHOHWLQJ GLUHFW SURJUDPPLQJ Activating the TP menu. 6HWWLQJ The station providing TP announcements can be directly selected by pressing one of the multifunction buttons. 6'5 73, for example, indicates the currently activated TP transmitter. Press 35* 6'5, for example, to display the programmed TP transmitter. 'HOHWLQJ Press multifunction button "'(/" to delete the programmed TP transmitter and to set the unit to automatic tracking. Quitting the TP menu. 68 5DGLR 2SHUDWLRQ 6ZLWFKLQJ RII 73 Press and hold the button for longer than 2 seconds. Press multifunction button "73" repeatedly in the TP menu until 2)) and 6(/(&7 73 appears. TP is switched off after returning to normal display. 0XWH IXQFWLRQ VZLWFK RQRII After selection of a TP or EON transmitter, the mute function can be activated by pressing the button briefly. The mute function is cancelled by pressing the button again or by turning the volume control. In order to cancel the function, press or turn the right rotary control, or press the track switching buttons or the fast forward / rewind buttons. 'ROE\ 15 To play cassettes recorded with Dolby NR, press the multifunction buttons % or & repeatedly for the desired noise reduction mode (Dolby B or Dolby C). A star is displayed alongside the Dolby noise reduction that has been set. To quit the noise reduction function, press multifunction button % or & repeatedly until the star is no longer displayed. 72 7DSH 2SHUDWLRQ 6NLS EODQN If skip blank is active, automatic forward is activated at blank tape sections which are longer than 10 to 15 seconds. In order to activate the function, press the multifunction button "6%" repeatedly until 21 or 2)) is shown on the display. 6FDQ VHDUFK Press the right rotary control to start the scan search. In order to cancel the function, press the track switching buttons or the fast forward / rewind buttons. &OHDQLQJ WKH FDVVHWWH PHFKDQLVP After a time, the reproduction quality of cassettes is reduced due to unavoidable dirt and dust deposits on the sound head. For this reason the cassette mechanism should be cleaned from time to time. The prompt &/($1 appears on the display after each 30 hours running time. Use a cleaning cassette suitable for reverse operation for this purpose. The cleaning cassette should be removed again after 30 seconds. 73 &'0' 2SHUDWLRQ &RPSDFW GLVF &' LQVWUXFWLRQV Sound interruptions may occur if the CD is dirty. In order to ensure optimum tone quality, please note the following: Always touch the CD at the edges only. Protect the CDs against direct sunlight and from heat sources such as heaters etc. [. . . ] Available at both planes: ON button - switch on / off BD button - select waveband MODE button - select operating mode Available at first plane: Button 2 / Button 8 / Button 5/SC Button / 4 Button 6 / - increase volume decrease volume scan function according to operating mode downward search or track skip downwards upward search or track skip upwards Available at the second plane after pressing the * button: Buttons 0 - 9 - station button selection 88 &RQQHFWLRQ , QVWUXFWLRQV C1 C2 C3 B A :DUQLQJ Terminal 30 and terminal 15 must always be connected separately, otherwise an excessive current consumption occurs when the unit is switched off. 6RFNHW $ 1 2 3 4 5 6 7 8 1 2 3 4 5 Speed dependent volume control not assigned Telephone mute / clearing function Permanent positive (terminal 30) Control output for automatic aerial / amplifier Illumination (terminal 58) Switched positive (terminal 15) Earth (terminal 31) Loudspeaker rear right + Loudspeaker rear right Loudspeaker front right + Loudspeaker front right Loudspeaker front left + 6 7 8 1 2 3 4 5 6 7-12 Loudspeaker front left Loudspeaker rear left + Loudspeaker rear left LineOut rear left LineOut rear right AF earth LineOut front links LineOut front right LineOut Subwoofer Special connection for Becker CD changer / Sony MD changer 6RFNHW & 6RFNHW & 6RFNHW & 13 AF telephone input 14 Earth - telephone input 15-17 Special connection for Becker CD changer / Sony MD changer 18 CD AF earth (AUX) 19 CD AF left (AUX) 20 CD AF right (AUX) 6RFNHW % 89 5HPRYDO , QVWDOODWLRQ *XLGH A universal bracket for DIN installation slots is integrated into this car radio. The unit is inserted into the installation slot and secured using the slides supplied. Subsequently, push the slides into the apertures in the front of the unit to the first detent position (illustration A). [. . . ]