User manual ASUS P4P800

[. . . ] P4P800 User Guide Motherboard E1324 Revised Edition V2 May 2003 Copyright © 2003 ASUSTeK COMPUTER INC. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. [. . . ] Power supply thermal connector (2-pin TRPWR1) If your power supply has a thermal monitoring feature, connect its thermal sensor cable to this connector. TRPWR1 ® P4P800 P4P800 Power Supply Thermal Connector 2-28 Ground TRPWR Chapter 2: Hardware information 9. ATX power connectors (20-pin ATXPWR, 4-pin ATX12V) These connectors connect to an ATX 12V power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. In addition to the 20-pin ATXPWR1 connector, this motherboard requires that you connect the 4-pin ATX +12V power plug to provide sufficient power to the CPU. 1. Make sure that your ATX 12V power supply can provide 8A on the +12V lead and at least 1A on the +5-volt standby lead (+5VSB). The minimum recommended wattage is 230W, or 300W for a fully configured system. The system may become unstable or may not boot up if the power is inadequate. ATXPWR1 +3. 3VDC -12. 0VDC COM PS_ON# COM COM COM -5. 0VDC +5. 0VDC +5. 0VDC +3. 3VDC +3. 3VDC COM +5. 0VDC COM +5. 0VDC COM PWR_OK +5VSB +12. 0VDC ATX12V1 +12V DC GND ® +12V DC GND P4P800 P4P800 ATX Power Connector ASUS P4P800 motherboard user guide 2-29 10. USB headers (10-1 pin USB_56, USB_78) If the USB ports on the rear panel are inadequate, a USB header is available for additional USB ports. The USB header complies with USB 2. 0 specification that supports up to 480 Mbps connection speed. This speed advantage over the conventional 12 Mbps on USB 1. 1 allows faster Internet connection, interactive gaming, and simultaneous running of high-speed peripherals. You must install the driver before you can use the USB 2. 0 capability. USB+5V USB_P6USB_P6+ GND NC ® P4P800 USB56 P4P800 USB 2. 0 Header NEVER connect a 1394 cable to the USB_56 or USB_78 connectors. Doing so will damage the motherboard! The USB port is an optional item and not included in this motherboard package. 2-30 Chapter 2: Hardware information USB+5V USB_P5USB_P5+ GND USB+5V USB_P7USB_P7+ GND 1 USB78 1 USB+5V USB_P8USB_P8+ GND NC 11. GAME/MIDI connector (16-1 pin GAME1) This connector supports an optional GAME/MIDI module. If a GAME/ MIDI module is available, connect the GAME/MIDI cable to this connector. The GAME/MIDI port on the module connects a joystick or a game pad for playing games, and MIDI devices for playing or editing audio files. ® P4P800 GAME1 P4P800 Game Connector MIDI_IN J2B2 J2CY MIDI_OUT J2CX J2B1 +5V The GAME port module is an optional item not included in this motherboard package. 12. Internal audio connectors (4-pin CD1, AUX1, MODEM) These connectors allow you to receive stereo audio input from sound sources such as a CD-ROM, TV tuner, or MPEG card. The MODEM connector allows the onboard audio to interface with a voice modem card with a similar connector. It also allows the sharing of mono_in (such as a phone) and a mono_out (such as a speaker) between the audio and a voice modem card. MODEM ® Modem-Out Ground Ground Modem-In +5V J1B2 J1CY GND GND J1CX J1B1 +5V Right Audio Channel Ground Ground Left Audio Channel CD1(Black) AUX1(White) P4P800 P4P800 Internal Audio Connectors ASUS P4P800 motherboard user guide 2-31 13. Front panel audio connector (10-1 pin FP_AUDIO) This is an interface for the Intel front panel audio cable that allow convenient connection and control of audio devices. By default, the pins labeled LINE_OUT_R/BLINE_OUT_R and the pins LINE_OUT_L/BLINE_OUT_L are shorted with jumper caps. Remove the caps only when you are connecting the front panel audio cable. AGND +5VA BLINE_OUT_R ® FP_AUDIO P4P800 P4P800 Front Panel Audio Connector 14. Digital Audio connector (6-1 pin SPDIF_OUT) This connector is for the S/PDIF audio module to allow digital sound output. [. . . ] WARNING: EXISTING DATA WITHING THIS VOLUME WILL BE LOST AND NON-RECOVERABLE [ ]-Change [TAB]-Next [<ESC>]-Previous Menu [<DEL>]-Delete Volume Take caution in using this option; All data on the RAID drives will be lost! ASUS P4P800 motherboard user guide 5-23 1. 2. Select option 2 Delete RAID Volume and press the <Enter> key to delete the RAID set. Press the <Delete> key to delete the RAID volume. [ VOLUME DELETE VERIFICATION ] Are you sure you want to delete this volume?(Y/N) 3. Confirm the volume deletion by pressing the <Y> key. 5. 4. 6 Reset RAID Data Intel(R) Integrated RAID for Serial ATA - RAID Configuration Utility Copyright(C) 2003 Intel Corporation. [. . . ]