User manual ASUS MY CINEMA-PHC3-100 MY CINEMA SERIES USER’S MANUAL(ENGLISH)

[. . . ] IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe. [. . . ] Locate the BIOS file from the Open window, then click Open. Follow the onscreen instructions to complete the updating process. 2. 1. 2 The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS‑based utility. Before you start using this utility, download the latest BIOS file from the ASUS website at www. asus. com. ASUS EZ Flash 2 To update the BIOS using EZ Flash 2: 1. 2. Insert the USB flash disk that contains the latest BIOS file to the USB port. Go to the Tool menu to select ASUS EZ Flash Utility and press <Enter> to enable it. Exit ASUSTek EZ Flash 2 BIOS ROM Utility V00. 75 Flash Info MODEL: P8H61-M-TPM/SI File Path: fs0:\ Drive fs0:\ Folder Info 03/25/11 09:47a 4194304 P8H61MTS. ROM VER: 0203 DATE: 03/25/2011 File Info MODEL: Help Info VER: DATE [Enter] Select or Load [Tab] Switch [Up/Down/PageUp/PageDown/Home/End] Move [Esc] Exit [F2] Backup 2-2 ASUS P8H61-M2 Series 3. 4. 5. 6. Press <Tab> to switch to the Drive field. Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS, and then press <Enter>. Press the Up/Down arrow keys to find the BIOS file, and then press <Enter> to perform the BIOS update process. Reboot the system when the update process is done. • This function supports USB flash disks with FAT 32/16 format and single partition only. • DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure! 2. 1. 3 The ASUS BIOS Updater allows you to update BIOS in DOS environment. This utility also allows you to copy the current BIOS file that you can use as a backup when the BIOS fails or gets corrupted during the updating process. The succeeding utility screens are for reference only. The actual utility screen displays may not be same as shown. ASUS BIOS Updater Before updating BIOS 1. 2. Prepare the motherboard support DVD and a USB flash drive in FAT32/16 format and single partition. Download the latest BIOS file and BIOS Updater from the ASUS website at http://support. asus. com and save them on the USB flash drive. NTFS is not supported under DOS environment. Do not save the BIOS file and BIOS Updater to a hard disk drive or USB flash drive in NTFS format. 3. 1. 2. Turn off the computer and disconnect all SATA hard disk drives (optional). Insert the USB flash drive with the latest BIOS file and BIOS Updater to the USB port. You can change modes from the Exit menu or from the Exit/Advanced Mode button in the EZ Mode/Advanced Mode screen. EZ Mode By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance mode and boot device priority. To access the Advanced Mode, click Exit/Advanced Mode, then select Advanced Mode. The default screen for entering the BIOS setup program can be changed. Refer to the Setup Mode item in section 2. 7 Boot memu for details. Displays the CPU/motherboard temperature, CPU/5V/3. 3V/12V voltage output, CPU/chassis/ power fan speed Selects the display language of the BIOS setup program Exits the BIOS setup program without saving the changes, saves the changes and resets the system, or enters the Advanced Mode Exit/Advanced Mode EFI BIOS Utility - EZ Mode P8H61-M2-TPM/SI BIOS Version : 0203 CPU Type : Intel(R) Core(TM) i5-2400 CPU 0 @ 3. 10GHz Monday [12/27/2010] Total Memory : 1024 MB (DDR3 1333MHz) Voltage 1. 184V 3. 360V 5V 12V 5. 160V 12. 096V Fan Speed 1982RPM Build Date : 03/25/2011 Speed : 3100 MHz English Temperature +123. 8ºF/+51. 0ºC +87. 8ºF/+30. 0ºC CPU MB CPU 3. 3V CPU_FAN CHA_FAN N/A System Performance Quiet Performance Energy Saving Silent Boot Priority Use the mouse to drag or keyboard to navigate to decide the boot priority. Boot Menu(F8) Default(F5) Selects the boot device priority Silent mode Standard mode Loads optimized default Turbo mode Selects the boot device priority Displays the system properties of the selected mode on the right hand side • The boot device options vary depending on the devices you installed to the system. • The Boot Menu(F8) button is available only when the boot device is installed to the system. Chapter 2: BIOS information 2-7 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. Refer to the following sections for the detailed configurations. To access the EZ Mode, click Exit, then select ASUS EZ Mode. Back button Menu bar Pop-up window General help Exit EFI BIOS Utility - Advanced Mode Main Back Ai Tweaker Advanced\ CPU Configuration > Advanced Monitor Boot Tool CPU Configuration Intel(R) Core(TM) i5-2400 CPU 0 @ 3. 10GHz EM64T Supported Processor Speed 3100 MHz Preocessor Stepping 206a6 Microcode Revision 28 Processor Cores 4 Intel HT Technology Not Supported CPU Ratio Range 16-31 CPU Current Ratio 31 Monitor Intel Adaptive Thermal CPU Ratio Intel Adaptive Thermal Monitor Active Processor Cores Limit CPUID Maximum Execute Disable Bit Intel Virtualization Technology Disabled Enabled Auto Enabled All Disabled Enabled Disabled Includes TM1, TM2 and EMTTM →←: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F5: Optimized Defaults F10: Save ESC: Exit F12: Print Screen Version 2. 00. 1201. Copyright (C) 2010 American Megatrends, Inc. Menu items Configuration fields Scroll bar Navigation keys Menu bar The menu bar on top of the screen has the following main items: Main Ai Tweaker Advanced Monitor Boot Tool Exit For changing the basic system configuration For changing the overclocking settings For changing the advanced system settings For displaying the system temperature, power status, and changing the fan settings For changing the system boot configuration For configuring options for special functions For selecting the exit options and loading default settings 2-8 ASUS P8H61-M2 Series Menu items The highlighted item on the menu bar displays the specific items for that menu. The other items (Ai Tweaker, Advanced, Monitor, Boot, Tool, and Exit) on the menu bar have their respective menu items. Back button This button appears when entering a submenu. Press <Esc> or use the USB mouse to click this button to return to the previous menu screen. Submenu items A greater than sign (>) before each item on any menu screen means that the item has a submenu. [. . . ] Cet appareil est conforme aux normes CNR exemptes de licence d’Industrie Canada. Le fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas provoquer d’interférences et (2) cet appareil doit accepter toute interférence, y compris celles susceptibles de provoquer un fonctionnement non souhaité de l’appareil. ASUS P8H61-M2 Series A-1 Appendices Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003. VCCI: Japan Compliance Statement VCCI Class B Statement KC: Korea Warning Statement REACH Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr. asus. com/english/REACH. htm. DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling. [. . . ]