User manual ASUS ES5000-P ES5000/ES5000P USER’S MANUAL(ENGLISH)

[. . . ] SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe. Offer to Provide Source Code of Certain Software This product contains copyrighted software that is licensed under the General Public License (“GPL”), under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software Licenses. [. . . ] The values range from 200k Hz to 400k Hz with a 10k Hz interval. VRM Spread Spectrum [Disabled] CPU Power Phase Control [Standard] Allows you to control the power phase based on the CPU’s demands. Configuration options: [Standard] [Optimized] [Extreme] [Manual Adjustment] DO NOT remove the thermal module when switching to Extreme and Manual Mode. The thermal conditions should be monitored. CPU Power Duty Control [T. Probe] DIGI + VRM Duty control adjusts the current and thermal conditions of every component’s phase. [Extreme] - Select to maintain the current VRM balance. ASUS ES5000-P 3-11 Chapter 3 This item becomes configurable only when you set the CPU Voltage Frequency item to [Auto] and allows you to enable the spread spectrum to enhance system stability. CPU Current Capability [100%] Allows you to configure the total power range, and extends the overclocking frequency range simultaneously. Configuration options: [100%] [110%] [120%] [130%] [140%] Choose a higher value when overclocking, or under a high CPU loading for extra power support. CPU Power Thermal Control [125] A higher temperature brings a wider CPU power thermal range and extends the overclocking tolerance to enlarge the O. C. The thermal conditions should be monitored. CPU Power Response Control [Auto] The DIG+ VRM controller provides a faster, and precise power response rate for the CPU. Configuration options: [Auto] [Regular: 100%] [Medium: 150%] [Fast: 200%] [Ultra Fast: 250%] The actual performance boost may vary depending on your CPU configuration. iGPU Load-line Calibration [Auto] Allows you to set the iGPU Load-line Calibration. Configuration options: [Auto] [Regular] [High] [Extreme] iGPU Current Capability [100%] Chapter 3 3-12 Allows you to set the iGPU Current Capability. Configuration options: [100%] [110%] [120%] [130%] Do not remove the thermal module while changing the DIGI+ VRM related parrameters . The thermal conditions should be monitored. DRAM Current Capability [100%] Allows you to set the DRAM Current Capability. Configuration options: [100%] [110%] [120%] [130%] DRAM Voltage Frequency [Auto] Allows you to set the DRAM Voltage Frequency automatically or manually. F1: General Help F2: Previous Values F3: Shortcut F5: Optimized Defaults F10: Save ESC: Exit F12: Print Screen Version 2. 10. 1208. Copyright (C) 2012 American Megatrends, Inc. Chapter 3 3-16 Scroll down to display the following items: Adjacent Cache Line Prefetch > CPU Power Management Configuration Enabled Version 2. 10. 1208. Copyright (C) 2012 American Megatrends, Inc. Intel Adaptive Thermal Monitor [Enabled] [Enabled] [Disabled] Enables the overheated CPU to throttle its clock speed to cool down. Disables the CPU thermal monitor function. Active Processor Cores [All] Allows you to choose the number of CPU cores to activate in each processor package. Configuration options: [All] [1] [2] [3] Chapter 3: BIOS setup Limit CPUID Maximum [Disabled] [Enabled] [Disabled] [Enabled] [Disabled] [Enabled] Allows legacy operating systems to boot even without support for CPUs with extended CPUID functions. Allows a hardware platform to run multiple operating systems separately and simultaneously, enabling one system to virtually function as several systems. Allows a hardware platform to run multiple operating systems separately and simultaneously, enabling one system to virtually function as several systems. Allows a hardware platform to perform adjacent cache line prefetching. Disables this function. Execute Disable Bit [Enabled] Intel® Virtualization Technology [Disabled] [Disabled] [Enabled] Hardware Prefetcher [Enabled] [Disabled] [Enabled] [Disabled] Adjacent Cache Line Prefetch [Enabled] CPU Power Management Configuration CPU Ratio [Auto] Allows you to set the ratio between the CPU Core Clock and the BCLK Frequency. The valid value ranges vary according to your CPU model. Enhanced Intel SpeedStep Technology [Enabled] [Disabled] [Enabled] [Enabled] The CPU runs at its default speed. The operating system controls the CPU speed. Allows you to enable or disable the Enhanced Intel® SpeedStep Technology (EIST). Turbo Mode [Enabled] [Disabled] Allows processor cores to run faster than marked frequency in specific condition. [. . . ] Operation is subject to the following two conditions: • • This device may not cause harmful interference. This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. [. . . ]