User manual ARCHOS JUKEBOX STUDIO

[. . . ] Copying CDs or downloading music files for sale or other business purposes is or may be a violation of copyright law. FCC Compliance This equipment has been tested and found to comply with the requirements for a class B digital device pursuant to Part 15 of the FCC regulations. These requirements are designed to provide reasonable protection against harmful interference in a residential area. This equipment generates, uses and can radiate radio frequency energy. [. . . ] As explained above, Menu Mode can only be entered by pressing the Menu Button. The LCD backlight is switched off 20 seconds after the last button has been pressed. press On or any other button briefly to re-activate the LCD backlight. To turn on the Jukebox, press and hold the On button during more than 3 seconds until it appears on screen. To turn off the Jukebox, press and hold the "Stop" button for more than 2 seconds. The Jukebox will remain active when powered from the DC adapter until the Off button is pressed for more than 3 seconds. On Menu Press ON to turn on the Jukebox Toggles between Menu & Browser & Audio modes Menu mode: change settings, see flowchart Browser mode: navigate your MP3 tracks. Use +/- to move up and down; use Play and Stop buttons to select or cancel out Audio mode: plays MP3 tracks, or a playlist Plays MP3 tracks, playlist, to pause or resume playing, to select, or to enter a folder when in Browser mode. Stops playing; toggle between Audio & Browser Press and hold for 3 sec to turn off Jukebox. Long press will scan Fast Forward in audio mode; or used to move up or down. Long press will scan Fast Backward in audio mode; or used to move up or down. Pre6Install the USB Drivers (see following section) or do as following: Turn on your computer and wait until it has finished booting. ARCHOS power adaptor may be required if there isn't enough power from the batteries. Connect the other end of the USB cable to a free USB port on computer. a "Welcome to the Found New Hardware Wizard"(Win98se/2000) appears. Click on the Next button Select the Recommended option to search for best driver, and click Next Insert the included Jukebox software CD into your CDROM drive. Specify your CD-ROM Player and add \drivers\ for example d : \drivers\ Click Next again when new hardware is found, and follow the on-screen instructions to complete the installation. You will recognize an additional drive letter is added for the Jukebox Note : If your Jukebox hard disk is not recognized, please refer to Trouble Shooting Drag and Drop, or Copy and Paste your MP3 tracks to the Jukebox hard disk drive letter. Click on the "peripheral" icon in the system tray Click on the pop-up windows asking for removal Wait until a message says removal is OK · Disconnect the USB cable on both ends, and Play the MP3 Tracks (as shown in the above steps) USB Cable ­ Both ends are identical. Indeed, you will find many useful options such as recording audio CD tracks to MP3, creating and saving a playlist that will allow you to play specific tracks of your favorite music on the Jukebox. Furthermore, you can download additional MP3 tracks from MusicMatch at http://www. Insert the CD software included with your CDROM Player Wait for the start of the setup software Click on MusicMatch French in order to install MusicMatch or Pre-Install the USB Drivers, in order to pre-install the USB Drivers then click OK Follow the instructions on the screens to complete the installations, and Restart your computer MusicMatchTM Recorder can be used to convert audio CD tracks into MP3 tracks for your Jukebox. [. . . ] The default location of playlist is located at : C:\ProgramFiles\MusicMatch\MusicMatch Jukebox\Playlist\Default Make sure that the MP3 files are in the Jukebox - Make sure to stop accessing the Jukebox before disconnecting the USB cable. - Never remove the USB connector or the power jack before removing your Jukebox from computer port. - Connect USB cable to Jukebox first, turn Jukebox On, then connect USB cable to computer, in the exact order - Not enough battery power, try to use the included ARCHOS DC power adapter. - If you are connected through a USB hub, ensure that the hub is connected and powered on. [. . . ]