User manual ALCATEL TEMPORIS RETRO

[. . . ] If the DTMF Caller ID is received, the record date/time will copy from the unit Date/Time. SETUP MENU R m en u REVIEWING CALL RECORDS • When the NEW indicator is ON, you have received new incoming calls. € If the incoming caller ID indicator is received in previous, the repeat indicator ‘REP’ will turn On. € When you reach the end of the call records, the display shows START/END. [. . . ] The part of the phone that pops up to activate the phone line when the handset is lifted from the base. A term used to describe the phone in its active mode when the handset is off of the base cradle. uNIT’S DATE / TIME The Unit’s Date / Time will NOT be shown after the Batteries installed. It can be set by incoming FSK type I / II Caller ID or Date / Time set menu. If you set the system clock by Date / Time set menu, it will never be updated by incoming Caller ID. If the system clock is firstly set by incoming Caller ID after the power up, it will be automatically updated by each Caller ID received. If a DTMF Caller ID is received, the receiving date / time for that Caller ID will be recorded as the system clock. The VMWI will blank if there have a message in the centralized voice mail system. When the LCD display shows the battery low icon, you need change a new battery (3 x AA) to ensure the unit is properly to operate. BEFORE YOU BEGIN PARTS CHECKLIST Make sure your package includes the following items: • a base and handset. TROUBLESHOOTING TIPS No Dial Tone • Check all cabling to make sure that all connections are secure and not damaged. € Check hook switch: Does it fully extend when handset is lifted from cradle?No Information is Shown After the Phone Rings • Are you subscribed to Caller ID service from your local telephone company?Phone Dials in Pulse with Tone Service • Make sure T/P DIAL MODE is set to TONE DIAL. Phone Won't Dial Out with Pulse Service • Make sure T/P DIAL MODE is set to PULSE DIAL. Phone Does Not Ring • You may have too many extension phones on your line. Incoming and Outgoing Voice Volume Low • Are other phones off hook at same time?If so, this is normal condition as volume drops when additional phones are used at once. SETUP MENU CALLER ID MESSAGE If the part or all of the Caller ID information are blocked by the calling party, the display will show ‘BLOCKED CALL’, ‘BLOCKED NUMBER’ or ‘BLOCKED NAME’. If the part or all of the Caller ID information does not available from the calling party due to the out of area, the display will show ‘UNKNOWN CALLER’, ‘UNKNOWN NUMBER’ or ‘UNKNOWN NAME’. If the part of the Caller ID information is incorrect, the display will show ‘INCOMPLETE DATA’. Se excluyen de la presente garantía los siguientes casos: - Productos dañados por un mal uso o utilización del Producto no conforme a las instrucciones del manual de usuario; - Por una conexión incorrecta o uso inadecuado del producto, en To use this phone, you need an RJ11C type modular telephone jack, which might look like the one pictured here, installed in your home. [. . . ] The product you have just bought is a technological product, which must be handled with care. UK legislation, including Sale of Goods Acts and regulations, imply certain conditions which may apply to the product you have purchased from the retailer (statutory warranty). For information concerning the statutory warranty, please consult the retailer who sold the product to you (seller). Without prejudice to any statutory warranty from which the product benefits, ATLINKS Europe whose registered office address is at 22 quai Gallieni 92150 Suresnes France warrants that the product contained in this package complies with the technical specifications set forth in the user’s guide, during a warranty period commencing on the date of purchase of an unused Product, which shall be presumed to be the date appearing on the invoice or the receipt issued by the seller, upon which appears the seller’s name and continuing for: Twenty-four (24) months for the telephone, excluding consumables, accessories and batteries. [. . . ]