User manual AEG-ELECTROLUX WASL3E 200

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX WASL3E 200. We hope that this AEG-ELECTROLUX WASL3E 200 user guide will be useful to you.


AEG-ELECTROLUX WASL3E 200 : Download the complete user guide (5867 Ko)

You may also download the following manuals related to this product:

   AEG-ELECTROLUX WASL3E200 (6278 ko)
   AEG-ELECTROLUX WASL3E 200 (5870 ko)
   AEG-ELECTROLUX WASL3E 200 (5870 ko)
   AEG-ELECTROLUX WASL3E200 (6278 ko)

Manual abstract: user guide AEG-ELECTROLUX WASL3E 200

Detailed instructions for use are in the User's Guide.

[. . . ] Safety information Environment concerns Technical information Product description Control panel Programmes Before first use Using the appliance Activating the appliance and setting a programme 2 4 4 5 6 10 13 14 14 Subject to change without notice Loading the laundry Using the detergent and additives Starting a programme At the end of the programme Hints and tips Care and cleaning Troubleshooting Installation 14 15 16 17 17 18 21 24 Before the installation and use, read this manual carefully: · For your safety and the safety of your property · Always keep these instructions with the appliance also if you move or give it to a different person. The manufacturer is not responsible if an incorrect installation and use causes damage. cHILDREN AND VULNERABLE PERSON SAFETY · Do not let persons, children included, with reduced physical sensory, reduced mental functions or lack of experience and knowledge use the appliance. They must have supervision or instruction for the operation of the appliance by a person who is responsible for their safety. [. . . ] 4) This program removes the micro-organisms thanks to the washing by 60°C and adds on rinse. Put into the compartment for stain remover a special additive for hygiene and select the option STAINS . 6) If you select this function the appliance performs only a drain phase. With a low spin speed the appliance performs delicate rinses and a short spin. 9) Set this programme to have a good washing results and decrease the energy consumption. Do not set the Steam programme for this type of clothes: · Clothes which is not specified on the care label as being suitable for tumble-drying. These programmes can reduce creases and odours and make your laundry more smooth. If necessary, remove stains by washing or using localized stain removal. 1) If you set a Steam programme with dried laundry, at the end of the cycle the laundry feel humid. It is better to expose clothes to the open air for about 10 minutes to let the humidity go away. If you put more laundry than the maximum load, the display tells that you put more than the maximum load. You can wash your laundry but the energy and water consumption increase. to have the best consumption and washing performance remove some items. The overload indication is available only for programmes with a maximum load lower than the appliance maximum load. This data is indicative and refers to the detergent quantity for a maximum load that the manufacturer recommends. Make sure not to have the laundry out of the drum between the seal and the door. If you use a liquid detergent, put it immediately before you start the programme. Put the product in the compartment and set the stain function before you start the programme. Flap for powder or liquid detergent Turn it (up or down) in the correct position to use powder or liquid detergent. Always obey the instructions that you find on the packaging of the detergent products. Make sure that the flap does not cause a blockage when you close the drawer. With the flap in the position DOWN: ­ Do not use gelatinous or thick liquid detergents. [. . . ] FROST PRECAUTIONS If the appliance is installed in an area where the temperature can be less than 0 °C, remove the remaining water from the inlet hose and the drain pump. Put the two ends of the inlet hose in a container and let the water flow out of the hose. Make sure that the temperature is more than 0 °C before you use the appliance again. The manufacturer is not responsible for damages caused by low temperatures. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX WASL3E 200




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX WASL3E 200 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.