User manual AEG-ELECTROLUX LL1630

[. . . ] Your local AEG Service Force Centre is available to deal with technical problems (addresses and telephone numbers are listed under "Customer Service Centres"). For additional information, also see the section "Service & Spare Parts". Printed on recycled paper. Switching on the appliance for the first time ­ setting the language Description of appliance. 6 6 8 8 9 10 10 10 11 11 11 12 12 12 13 13 14 15 17 17 17 18 19 20 22 22 23 24 24 24 24 Before the first wash. [. . . ] 30 seconds after the washing machine is switched on or after a button or the control knob was last actuated, the START indicator will begin to flash. If you do not wish to make any further settings, press the START button. If a delayed start has been set: If the DELAY START option has been selected, the wash programme will finsh at the time shown in the display. If the wash programme has not yet been started, you can still cancel the delay start. DELAY START". ) If you would like to add washing even after the programme has started. The N symbol is displayed as the programme progresses: the loading door is locked. 1000 RPM PAUSE DELICATES 30°C 11:25-12:36 N§ MAIN WASH #####=========] 1000 MOISTURE 49 % Moisture/Loading During the wash programme LINEN/EASY-C. 60°C 1400 RPM 11:25-12:36 the display additionally indiN§ PAUSE cates: MAIN WASH ­ the expected residual #####=========] moisture in the washing at LOADING 80 % 1400 MOISTURE 50 % the end of the programme. ­ the loading of the drum (in 10 per cent steps. ) This value is indicated with the LINEN/EASY-CARES and COTTONS programme only. The loading can be estimated by the washing machine about fifteen minutes into the programme. Changing the spin speed The spin speed can still be changed and rinse hold still be set during the programme. Cancelling the programme To cancel the programme before it has finished, switch off the appliance (press the control knob). The wash programme can be interrupted at any time by pressing the PAUSE button. 3 32 When the wash programme is complete 3 3 When a wash programme is complete, PLEASE TAKE OUT THE CLOTHES will appear in the display. After this new entry the first level now includes a total of four pages. The navigation symbol will change to þ. 36 Cancelling a saved programme setting 1. Press the OPTIONS button. 1200 RPM START 40° 1200 OPTIONS LINEN/EASY-C. Press the EXTRAS button. 1200 RPM START SELECT BACK EXTRAS LINEN/EASY-C. 40°C 10:17-12:16 ç TIME SAVING) DELAY START SENSITIVE STAIN PRE WASH If MEMORY is highlighted: 3. Press the SELECT button. SELECT BACK EXTRAS ì MEMORY( RINSE+ WATER COOLING GENTLE SPIN 4. You are now on the first level again. EXTRAS é CLEAR BACK MEMORY 1!( MEMORY 2§§ MEMORY 3§§ MEMORY 4§§ 37 Changing the language You can change the language setting if you would like the indicators in the display to appear in a different language. Press the OPTIONS button. 1600 RPM START 60° 1600 OPTIONS LINEN/EASY-C. 60°C 10:17-12:16 î LINEN/EASY-C. ) ENERGY SAVING COTTONS DELICATES WOOLLENS H 3. Press the EXTRAS button. 1600 RPM START SELECT BACK EXTRAS LINEN/EASY-C. 60°C 10:17-12:16 ç TIME SAVING) DELAY START SENSITIVE STAIN PRE WASH 4. [. . . ] · The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any person not authorised by us. · All service work under this guarantee must be undertaken by a Service Force Centre. Any appliance or defective part replaced shall become the Company's property. · This guarantee is in addition to your statutory and other legal rights. [. . . ]