User manual AEG-ELECTROLUX LAV74819

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX LAV74819. We hope that this AEG-ELECTROLUX LAV74819 user guide will be useful to you.


AEG-ELECTROLUX LAV74819 : Download the complete user guide (649 Ko)

You may also download the following manuals related to this product:

   AEG-ELECTROLUX LAV74819 (651 ko)
   AEG-ELECTROLUX LAV74819 (994 ko)
   AEG-ELECTROLUX LAV74819 (994 ko)
   AEG-ELECTROLUX LAV74819 (994 ko)
   AEG-ELECTROLUX LAV74819 (994 ko)

Manual abstract: user guide AEG-ELECTROLUX LAV74819

Detailed instructions for use are in the User's Guide.

[. . . ] The clover leaf indicates tips and information on the economical and environmentally-responsible use of the unit. This user information contains information on remedying any faults which may occur, see the section "What to do if . . . ". If these instructions are not sufficient, our After-Sales Service is at your disposal at any time: ELGROEP & AEG SERVICE Bergensesteenweg 719 1502 Lembeek Tel. : 02/3630444 Here you will receive an answer to any question concerning the features and use of your unit. Of course, we are also pleased to receive any requests, suggestions and criticism. [. . . ] The multidisplay also shows the remaining time and the display END (EINDE) is illuminated. You can open the filling door and take the washing out at any time during the crease protection phase. · START/PAUSE (START/PAUZE) flashes if spin speed 0 (rinse hold ) was selected. After a rinse hold it is first of all necessary to pump off the water: ­ Either press START/PAUSE (START/PAUZE) button (the washing will be spun according to the just finished program; with the SPIN SPEED (CENTRIFUGETOERENTAL) button the spin speed can be changed even during the spin-drying process), or ­ turn program selector to PUMP (POMPEN) and then press button START/PAUSE (START/PAUZE) (the water is pumped off without a spin), or ­ Turn the program selector to SPIN (CENTRIFUG. ) or to SHORT SPIN (KORT CENTRIFUGEREN) and press START/PAUSE (START/PAUZE) button (the washing is spin-dried normally or with a short spin). END (EINDE) is illuminated at the end of this program step. 3 25 Instructions for use 2. As soon as DOOR/LIGHT (DEUR/LICHT) is illuminated in green the door can be opened (not if program saving is active, see "Program Saving"). After washing, pull out the washing detergent drawer slightly so that it can dry out. Only lean the door against the washing machine so that the latter can air out. 3 Too much detergent was used in the just finished program if OVER DOSING (OVERDOSERING) is illuminated. Observe the dosing recommendations of the detergent manufacturer as well as the filling quantity for the next wash. If the washing machine is not used for a long time: Close the water tap and disconnect the washing machine from the electricity mains. (Aqua Control water protection with Aqua Alarm does not operate if the power supply is interrupted. ) 26 Instructions for use Program Tables Washing Not all possible settings are listed below - only the ones most commonly used in everyday operation and the most appropriate ones. Type of Washing, Care Codes Max. · It the fault code C1 or C2 appears in the multi-display, you may be able to remedy the fault yourself (see the fault table below). After remedying the fault, press the button START/PAUSE (START/PAUZE). If the fault code is displayed again, please inform the Customer Service. · In the case of all other displayed faults (C and number or letter), please inform the Customer Service and state the fault code. Problem Possible Cause The mains plug is not plugged in. Cancel the child safety feature (see Section "Child Safety Feature"). UnFilter in screw connection of screw the hose from the tap, remove the sieve and clean the intake hose blocked. Check water tap and have it repaired if necessary. 32 Instructions for use Problem Possible Cause The transport packaging has not been removed. Remedy Remove transport packaging according to the installation and connection instructions. Adjust in accordance with the installation and connection instructions. The washing machine There is not much washing in This does not impair the vibrates during opera- the drum (e. g. Check the laying of the The water could not be com- drainage hose and eliminate the bend if necessary, or pletely pumped off before clean the solution pump and, spinning because the drainage hose is bent or if required, remove foreign the solution pump is blocked. Meter the detergent exactly Probably too much detergent in accordance with the manwas used ufacturer's information. [. . . ] ­ Use only new sets of hoses for connection! Permissible Water Pressure The water pressure must be at least 1bar (= 10N/cm2 = 0. 1MPa), maximum 10bar (= 100N/cm2 = 1MPa). · In the case of more than 10bar: Connect a pressure-reducing valve upstream. · In the case of less than 1bar: Unscrew the intake hose on the unit side on the inlet solenoid valve and remove the flow regulator (to do this, remove the filter with pointed pliers and remove the rubber washer behind). Replace the filter. 48 Setting up and connection instructions Water Inflow A pressure hose 1. 5m in length is supplied. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX LAV74819




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX LAV74819 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.