User manual AEG-ELECTROLUX LAV47379

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX LAV47379. We hope that this AEG-ELECTROLUX LAV47379 user guide will be useful to you.


AEG-ELECTROLUX LAV47379 : Download the complete user guide (1038 Ko)

You may also download the following manuals related to this product:

   AEG-ELECTROLUX LAV47379 (1187 ko)
   AEG-ELECTROLUX LAV47379 (1031 ko)
   AEG-ELECTROLUX LAV47379 (1182 ko)

Manual abstract: user guide AEG-ELECTROLUX LAV47379

Detailed instructions for use are in the User's Guide.

[. . . ] Only a qualified person must do the electrical installation, the plumbing and the installation of the appliance. Do not install or use the appliance where the temperature is less than 0 °C. When you install the appliance on a carpet floor, make sure that there is air circulation between the appliance and the carpet. Do not put flammable products or items that are wet with flammable products in, near or on the appliance. [. . . ] You can hear the acoustic signals when: · If you deactivate the acoustic signals, they continue operate only when you press the buttons and when a malfunction occurs. stain remover into compartment This function increases the programme duration. This function is not available with a temperature lower than 40° C. To activate the function, press button 9 and button 10 at the same time until the display shows the symbol . To deactivate the function, press button 9 and button 10 at the same time until the symbol goes off. you can activate the function: · Before you press the Start/Pause button 4 : the appliance cannot start. After you press the Start/Pause button 4 , all the buttons and the programme knob are deactivated. Decrease the maximum speed of the spin phase when you set a programme. The display shows only the spin speeds available with the set programme. The appliance does not drain the water when the programme is completed. With this function you can keep the extra rinse function permanently on when you set a new programme. The indicator of the set function comes on or the display shows the related symbol. Press button 5 again and again until the display shows the number of minutes or hours. Before you press button 4 to start the appliance, you can cancel or change the set of the delay start. If the temperature and level of the water in the drum are too high, the door lock symbol stays on and you cannot open the lid . If you deactivate the appliance, it is necessary to set the programme again. After five minutes from the end of the programme, the AUTO OFF function automatically deactivates the appliance. When you activate the appliance again, the display shows the end of the last set programme. When the programme is completed and the door lock symbol goes off, you can open the door 4. Turn inside out multilayered fabrics, wool and items with painted illustrations. Do not wash in the appliance : ­ Laundry without hems or with cuts ­ Underwired bras. if this occurs , adjust manually the items in the tub and start the spin phase again. [. . . ] If this occurs, do steps (1) through (3) of 'To clean the drain filter'. Put the end of the inlet hose in a container and let the water flow out of the hose. Turn the programme knob to Stop to disconnect the appliance from the power supply. Make sure that the temperature is more than 0 °C before you use the appliance again. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX LAV47379




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX LAV47379 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.