User manual AEG-ELECTROLUX EWP1462TDW

[. . . ] · If the mains cord of this appliance is damaged, it has to be replaced by the manufacturer or its customer service or a trained electrician to avoid risks. · Never use the kettle if it has been dropped or has evidently been damaged. · Repairs to this appliance may only be carried out by qualified service engineers. [. . . ] · Always pull out the plug, ­ before cleaning and attending to the kettle, ­ and after each time it is used, ­ and for faults during operation. 3 2 Next to this symbol you receive additional information and practical tips on using the appliance. Tips and information about the economical and environmentally friendly use of the appliance are marked with the clover. Description of the appliance A B C D E F G H J K Case Strainer insert Spout Lid Button Handle Water level indicator ON/OFF switch with pilot light Separate base and mains cable Rating plate Safety of children · Only use the express kettle when supervised. plastic bags, should not be accessible to children. 7 g Points to remember when operating the express kettle · Before starting the appliance ensure that the mains cord and plug are dry. · Whilst using the express kettle, high temperatures are reached which can cause scalding if the kettle is not handled carefully. · Attention: If the kettle is overfilled there is a risk that the boiling water may spray out. · Never use the appliance with the lid (D) open as otherwise the automatic switch off cannot work. · If the appliance is used for any other purpose or is incorrectly used, the manufacturer adopts no liability for any damages which may result. · Only use the kettle with the associated base. Disposal 2 Packaging material The packaging materials are environmentally friendly and can be recycled. If you want to reheat water which has already been heated, press the ON/OFF switch (H) down again. If the kettle is only filled with a little water, it takes longer to switch off. Descaling Lime scale deposits on the bottom of the kettle result in loss of energy and can affect the service life of the appliance. The appliance switches off before boiling if the layer of scale is too thick. The appliance should be descaled regularly depending on the level of the water hardness. Use a standard descaler following the directions; preferably choose an environmentally friendly, descaling agent suitable for stainless steel according to the instructions from the manufacturer. 0 First fill in water, then a standard descaling preparation which is not too strong. Safety system This appliance is equipped with a boildry safety cut-out. This feature protects the appliance from overheating when started without water or from boiling until it is empty if used with the lid open. If the appliance is accidently switched on without water, it is automatically protected against overheating. [. . . ] If the appliance is accidently switched on without water, it is automatically protected against overheating. Before using the kettle again let it cool down for 510 minutes. 1 Do not boil the solution as it could foam over. Never pour descaling agents into an enamel sink and do not reuse them. 9 g What to do if . . . · the appliance switches off before boiling? [. . . ]