User manual AEG-ELECTROLUX ETN1201H KM100

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX ETN1201H KM100. We hope that this AEG-ELECTROLUX ETN1201H KM100 user guide will be useful to you.


AEG-ELECTROLUX ETN1201H KM100 : Download the complete user guide (393 Ko)

You may also download the following manuals related to this product:

   AEG-ELECTROLUX ETN1201H KM100 (423 ko)

Manual abstract: user guide AEG-ELECTROLUX ETN1201H KM100

Detailed instructions for use are in the User's Guide.

[. . . ] If repairs become necessary, please contact our Customer Services or your dealer. Child Safety · Never leave children unsupervised when the appliance is in use. Safety during Operation This appliance should be used only for the domestic cooking, roasting and baking of food. · Be careful if connecting electrical appliances to sockets near this appliance. [. . . ] Switch warning beeps on or off. ­ Set+Go ­ ­ Heat+Hold ­ ­ Time Extension Display Contrast Display Brightness Set language Buzzer Volume Key Tones Alarm/Error Tones ­ ­ 1 . . . . . 10 ­ ­ ­ ­ On Off On Off electrolux 19 Setting Service Display ECAIA207 V03IA003 24 Description Indicates the version of the software and the period of operation. Reset all settings to the factory settings (My Programmes too). Factory Settings duces its brightness when the appliance is switched off to save energy. The value currently set appears in the display. 3 Between 22:00 and 6:00 the display re- 2. Press key repeatedly until the "Set+Go" window appears. 3. Confirm with . Press any key to switch off the signal. 3 While the selected oven function with is 3 Everyday use of Basic Settings Set+Go The function Set+Go means you can set all settings for an oven function and then start it later. Example application: You prepare a dish in the morning and enter all necessary settings in the oven. Your child comes home at lunchtime, puts the dish in the oven, presses any key and the oven starts with your settings. Select oven function with desired settings. operating Set+Go, the Key Lock is active (see section Key Lock). Set+Go can be activated or deactivated in the Basic Settings menu. Heat+Hold The function Heat+Hold keeps your prepared dish warm for 30 minutes, after the baking or roasting has ended. Condition for Heat+Hold: · Fixed temperatur is above 80°C · Fixed switch-Duration 20 electrolux To switch on Heat+Hold 1. Press key repeatedly until the "Heat+Hold" window appears. Confirm with . Press key repeatedly until the "Duration/End Time" window appears. Using the Duration function, set the time required for cooking the dish, e. g. : 1 hour. Using the End Time function, set the time at which the dish is to be ready, e. g. : 14:05. To switch off Key Lock 1. After the appliance is switched off, the Key Lock is automatically cancelled. Child Lock for the oven As soon as the Child Lock child safety device is activated, the oven cannot be operated. Press and keys at the same time until a message appears in the display. Press and keys at the same time until a message appears in the display. The Child Lock is now deactivated and the oven is again ready for use. Oven Automatic cut-out if the temperature is not modified, the oven switches off automatically. The oven switches itself off when the oven temperature is: 30 - 120°C 120 - 200°C 200 - 230°C after after after 3 The Key Lock does not protect the ap- 6. The selected oven function is displayed with the cooking time and switch-off time set for a few seconds. . 3 If not switched off after a certain time, or A message is displayed when the programme starts. 12. 5 hours 8. 5 hours 5. 5 hours Key Lock The key lock protects all functions set from accidental changes. [. . . ] If there is no neutral wire on the domestic supply side, please order transformer R07 with order number 940 304189 (2-phase). The installation must be carried out using a cable with a plug or, for a domestic installation, a separator with a contact opening of at least 3mm is required which also separates all poles of the appliance from the mains in accordance with NIN 2000. For a direct connection a cable length of at least 120 cm is required. Connection diagram 400V 1 When installing next to wood furnaces, Phase definitions: L1, L2, L3 (or R, S, T) 2. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX ETN1201H KM100




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX ETN1201H KM100 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.