User manual AEG-ELECTROLUX ESF4510ROX

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX ESF4510ROX. We hope that this AEG-ELECTROLUX ESF4510ROX user guide will be useful to you.


AEG-ELECTROLUX ESF4510ROX : Download the complete user guide (8776 Ko)

You may also download the following manuals related to this product:

   AEG-ELECTROLUX ESF4510ROX (9129 ko)

Manual abstract: user guide AEG-ELECTROLUX ESF4510ROX

Detailed instructions for use are in the User's Guide.

[. . . ] Put the knives and all items with sharp points in the cutlery basket with their points down. If you open the door while the appliance is in operation, hot steam can escape. ⷠDo not remove dishes from the dishwasher before the end of the washing programme. ⷠWhen the washing programme is completed, disconnect the mains plug from the mains socket and close the water tap. [. . . ] Remove the spilled rinse aid with an absorbent cloth to prevent too much foam during the subsequent washing programme. You can set the rinse aid dosage between position 1 (lowest dosage) and position 6 (highest dosage). Only use the appliance for household utensils that are applicable for dishwashers. Do not use the appliance to clean objects that can absorb water (sponges, household cloths, etc. Before you load cutlery and dishes, do these steps: ­ Remove all food remainings and debris. While you load cutlery and dishes, do these steps: ­ Load hollow items (e. ­ Make sure that water does not collect in the container or in a deep base. ­ Make sure that cutlery and dishes do not lie inside one another. ­ Make sure that cutlery and dishes do not cover other cutlery and dishes. Plastic items and pans with non-stick coatings can keep water droplets. Make sure that the spray arms can move freely before you start a washing programme. Turn the programme knob counterclockwise until the programme marker agrees with the first washing programme on the control panel. Release the start/cancel button when the display shows the water hardness level. Turn the programme knob counterclockwise until the programme marker agrees with the second washing programme on the control panel. ­ The phase indicator light or lights for the washing programme come on. ­ When the programme starts, only the indicator light of the phase in progress stays on. Fill the detergent dispenser with detergent before you set a new washing programme. Press the delay start button until the display shows the necessary delay start time for the washing programme. When the countdown is completed, the washing programme automatically starts The phase indicator light of the phase in progress comes on. Do not open the door during the countdown to prevent interruption of the countdown. When you close the door again, the countdown continues from the point of interruption. End of the washing programme Switch off the appliance in these conditions: · For better drying results, keep the door ajar for some minutes before you remove the dishes. [. . . ] If you cannot find a solution to the problem yourself, contact the Service Force Centre. Switch off the appliance before you do the below suggested corrective actions. If the hot water comes from alternative sources of energy that are more environmentally friendly (e. Solar or photovoltaic panels and aeolian), use a hot water supply to decrease energy consumption. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX ESF4510ROX




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX ESF4510ROX will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.