User manual AEG-ELECTROLUX EKAM300

[. . . ] € Keep the appliance and its cord out of reach of children less than 8 years. € The appliance may only be connected to a power supply whose voltage and frequency comply with the specifications on the rating plate!€ Never use or pick up the appliance if – the supply cord is damaged, – the housing is damaged. [. . . ] Press the pre-ground coffee powder button to close the grinder function. How to prepare coffee using the coffee grinder with preprogramming of the start (Auto function). The number of be prepared cups is indicated in the display: 2, 4, 6, 8 and 10 cups can be set. The symbols of coffee strength is indicated on the display: mild, medium, strong. If the appliance is pre-programmed using the Auto function, but the coffee is requested before the start time. Note - When preparing coffee with beans: Coffee preparation takes place with the settings in normal mode. When the settings differ from the Auto function, it is needed to change the settings accordingly in the normal mode prior to the start. After finishing program setup, short press Program button to activate the Auto function. If once preprogrammed, the start time, number of cups and coffee strength are not to be changed. When reached the pre-set time, the machine will start brewing coffee and the keep warm function. If the Auto function is activated but the program is not intended to start, press the Program button. After brewing, the warming plate keeps the coffee in the glass jug warm. Two hours after brewing, the appliance will go into standby mode automatically. Clean the coffee grinder regularly from oily residues from the coffee beans using a dry cloth . First fill the fresh water container with water and then add the descaling agent. Allow the descaling solution to work for approximately 15 minutes, then switch on the appliance. [. . . ] To clean the drip stop, push it to open it and then rinse it under the tap. If you remove the jug for more than 20 seconds during the brewing process, the drip stop causes the filter basket to overflow. Use thin cups, because they absorb less heat from the coffee than thick cups. [. . . ]