User manual ACESONIC KM-112

[. . . ] Avoid Moisture, Water and Dust · Do not place the mixer in a moist environment or in an area where there might be an excessive amount of dust build up (e. g. , near a fan). 3. Advance digital sound enhancement technology improves the full range of audio frequencies to fine-tune the sound of your musical output. It enables users to enjoy a more natural and comfortable sound. singers using the 1/4-inch microphone style jacks on the front panel. 5. [. . . ] Note: This control does not adjust volume of the microphones or effects. 8. Headphone/alternate speaker output: Plug in your headphones or alternate (powered) speakers here. Headphone volume control: Control the volume of the headphones or alternate speakers here. 9. Computer/audio button: Use this button to select whether you want to use the KM-112 as an audio mixer (Audio) or as a USB interface (USB) to record vocals on your Windows computer. 3D sound processor button: Use this to turn the 3D sound enhancer on/off. 1 2 3 4 5 6 7 8 9 10 Technical Specifications · Size: 11. 5 (L) x 7. 75 (W) x 1. 75 (H) in inches, · 3. 2 lbs. net weight · PC to KM-112 USB connection · (2) XLR audio inputs (balanced, rear) · RCA audio inputs (2, rear) · RCA audio outputs (2, rear) · KM-112 has an integrated C-Media CM106 Audio I/O Controller · (2) 1/4-inch audio inputs (unbalanced, front) · Mini-jack audio out (1, front) · Voltage: Switchable 115~230V (rear) · Adheres to FCC regulations (see page 7) 3 Rear Panel Operation and Functions 1. XLR balanced inputs: With these inputs you can connect a balanced microphone, the output jack of a wireless microphone or an electric guitar with balanced output. Audio out: Connect this RCA type line level output to the input of an amplifier or powered (active) speaker system. This can accept a signal from any line level audio device, such as DVD, CD, MD, PC, MP3/ MP4 players, etc. USB cable connection: Use this USB cable to con- nect KM-112 to your computer for audio in and out. Please use the USB cable that comes with your KM112 and connect it first. The driver of KM-112 will automatically install into your Windows computer. After installing the driver, please restart your computer to activate the driver (Windows) and register the device with Device Manager to use both the mixer and the USB interface functions . Voltage switch: Select the power supply voltage for the KM-112 according to your local power supply (115V-230V). Power cable connector: Use this to connect the power cord to supply AC power to the unit. 1 Recording and Playback with Computer 2 3 4 top 5 bottom 6 · On your Windows PC, the driver automatically installs when you connect and power up the device. · Windows will manage the device through the Device Manager utility for setting recording and playback levels and functionality. The KM-112 is a "USB Multimedia Device, " allowing you to select the device and control input and output levels for recording and playback. · There is a front panel switch (see page, "Front Panel Operation and Functions, " item number 9) to choose · If you have computer files that have had vocal tracks removed, or came without vocals, you can record your own vocals and overdub the instrumental tracks. [. . . ] Following any servicing or repair of this product, ask the service technician to perform the appropriate safety checks to ensure the product is in proper operating condition. The product should not be mounted to a wall or ceiling except as recommended by the manufacturer, with a mounting accessory recommended by the manufacturer. If your product is not operating correctly or exhibits a marked change in performance, and you are unable to restore normal operation by following procedures in this User Manual, do not attempt to service it yourself. [. . . ]